clutch bell shims

[X25]

hey guys i need a link for clutch shims if yall can get around to it. Thanks X25

 

[Jeremy]

Jason it would probably be cheaper and easier to got to a hardware store and get them .. Ace is the place where I get mine

 

[X25]

thanks jeremy any other suggestions will be welcomed.(taking suggestions out side the group) LOL

 

[Larsenracing]

Get this kit http://www.killerhobbies.com/items/...for-clutch-bells-ofn10410-ofn10410-detail.htm as its got some very nice parts for the front of the crank shaft. You are also going to want to get the metal bushing from HPI that they use on the new 4.6's which replaces the brass one who wears out rather quickely. Here is a picture of one on my old motor note it had a brass washer on it.

 

[X25]

i need to shim behind the clutch bell. the shoes rub the bell

 

[crzy-svg-usr]

just use any washer u find in ur house anything works don't need anything special

 

[Larsenracing]

They will rub. If its dragging then you have to many shims in the front side of the bushing where I showed in the pict.

 

[Double-O-Zilch]

thanks jeremy any other suggestions will be welcomed.(taking suggestions out side the group) LOL

:stickpoke: LOL
I used this kit. Worked for me.

Clutch Shims
Or this one

 

[X25]

thanks for all the help guys!!

 

[oregonmud]

OFNA clutch bell shim kit is awsome. It has all the spacers you could possibly need for your next 10 shimming jobs. $3.99 + 1.69 shipping

http://cgi.ebay.com/Ofna-1-8th-Scal...ryZ44028QQssPageNameZWDVWQQrdZ1QQcmdZViewItem