40 Series Big Joe meets OFNA Rim

JVT73

Well-Known Member
Messages
288
Location
Pennsylvania
Finally bit the bullet and glued up these old Joe's to the OFNA rims! I must say, what a pain, this was not the easyist combo to glue up. Check out the pic's. The rubber hangs out past the rim by about 1" on the front side! I hate hack glue jobs and this isn't my best show!

IMG_0129.JPG IMG_0130.JPG
 

JVT73

Well-Known Member
Messages
288
Location
Pennsylvania
Nice Job !!! I have been using plumbers goop to mount my tires for over 10 years and going, thing I like is they hold tight and my wheels are reusable after the tires wear out.....


https://www.hpisavageforum.com/threads/how-to-mount-tires-with-goop.13975/
Thanks Jam, I used to be real good at the foams, now my glue job is mediocre on the rubber! I'm getting the hang of it back again and maybe the next set will not have any runners, if ya know what I mean?
 
Top