4.6 vid Engine break down

[dociledragons]

Does anybody know of such a vid.? I know there are videos of other nitro break downs but, looking for the savage 4.6 with clutch dissasemmbly

 

[xll-SavageX-llx]

It's pretty straight forward.
Once the mill is out of the truck you can remove the screw holding the clutch bell, followed by 1 -3 shims depending on how many you have, then pull the clutch bell of you will find one more shim and two bearings inside each side of the clutch bell. When removing the clutch shoes it's highly recommended using a clutch shoe removal tool, makes like so much easier.
Re-assembly just the reverse of dis-assembly

here is your video
[YOUTUBE]bYpuoXbzG5Y&feature=related[/YOUTUBE]

 

[dociledragons]

I guess I was looking for a Vid for the HPI 4.6 complete breakdown w/ carb

 

[xll-SavageX-llx]

I guess I was looking for a Vid for the HPI 4.6 complete breakdown w/ carb

It's all the same. In the video he has a .28 mill which is a 4.6.
Only thing you have to remember is with the carb it's a pinch bolt, losen it about 1/4 of the way then apply downward pressure and the pinch bolt will release.