Search results

  1. Squalla

    rc4me center diff Super 5SC transmission in my HPI Savage Flux HP

    Well, that trans is for the 5SC so maybe that is why the ratio is different.
  2. Squalla

    Integy stuff

    I snapped the screws holding the irc shocks using rpm arms and 6mm spacer. It is hard to remove a broken screw without hurting the nylon threads. No, stock arm work better with irc shocks as 2/3 of the screw is supported by the a-arm opposed to only 1/3 with the rpm arms.
  3. Squalla

    Info on FLM bulks?

    Nobody wants to wait 2 months on drive cups so they can use hybrid bulks, I can't support a company that has so long lead time. Almost as long lead time as a brand new car. Alza machine their stuff right away if they don't have it in stock. Just got some custom battery boxes and skid plate and...
  4. Squalla

    Integy stuff

    Integy by nature is bad because they use cast low grade aluminium. Sadly integy is the only option some times, I am forced to use the integy rear carriers for example. i used the front caster blocks and steering knuckles but they bent slightly so now I use stock knuckles/caster blocks. I also...
  5. Squalla

    Info on FLM bulks?

    Tie rod brace: https://shop.alza-racing.com/en/savage-nitro/10-tie-rod-brace.html Bulkhead brace: https://shop.alza-racing.com/en/flux-standard/11-bulkhead-brace-conversion-kit.html Upper arm brace: https://shop.alza-racing.com/en/savage-nitro/16-upper-arm-brace-set.html I use all these on my...
  6. Squalla

    Info on FLM bulks?

    I use integy hub carriers in the rear, but I still have that alza tie rod brace because it looks dope. Will get one for the front as well som time hehe.
  7. Squalla

    Info on FLM bulks?

    Yes that is the intended purpose, but I have no tie rods :D, I use only for looks ^^ .
  8. Squalla

    Info on FLM bulks?

    Yes that is correct, but one is for buggy diffs and CEN diffs, the other one is for standard savage diffs. Either way both are useless unless you have the FLM drive cups. Mega-rc has been waiting for FLM drive cups over 2 months.
  9. Squalla

    Info on FLM bulks?

    Stock bulks are pretty decent because they allow for easy maintenance. You could always get the alza bulkhead brace that reinforce the bulkhead area as well as the tie rod braces which are 3mm instead of 2.5mm. I also use the tie rod brace because it looks cool but I don't know what benefit it...
  10. Squalla

    Info on FLM bulks?

    I got a reply from FLM, the 40010 hybrid bulk incl. drive cups takes 2 months to deliver as they don't have it stock or planning on making it unless they get enough orders. Well, its your own loss not mine :D .
  11. Squalla

    Info on FLM bulks?

    Yes I know but he doesn't sell the drive cups needed in order to use the hybrid bulks. According to him, FLM doesn't respond to email and he has been waiting 2 months alreaddy for the drive cups. I have emailed and called FLM as well as RC-monster but they don't repond so screw them. I won't...
  12. Squalla

    Savage xl flux v2

    I don't know the quality of King Motor parts but considering they have been around a while in the Baja community I assume the quality is decent. Some even say King Motor invented the Baja concept. I haven't bought from rc4me.us, I live in EU, but it is worth a try.
  13. Squalla

    Info on FLM bulks?

    You will need the FLM 40010 because the FLM drivecups are included. You need FLM drivecups with the bulkhead beacuse the stock ones are too thick. Now, good luck getting into contact with FLM. They haven't responded me in 6 months about an inquiry.
  14. Squalla

    Alza battery tray

    I have them myself: They do add some weight compared to the stock plastic ones but they look really cool and you can change the lenght of the boxes to fit the battery you use by moving the small plates into slots. Installation is easy as well, just ask Alza for a PDF manual and they send you...
  15. Squalla

    New to the flux gang. Diff questions.

    King Motor machined ring and pinion, cheap: https://rc4me.us/product/hpisav8013/
  16. Squalla

    Savage xl flux v2

    I will be frank with you. Firsty the savage flux needs shimming in order to get the mesh right between the pinion and the ring gear. Secondly the new flux use the sintered ring, which is inferior the machined ring and pinion that HP had. Thirdly, if you drive on 6s and jumping you would want a...
Back
Top