Search results

  1. Upbasher

    1st ever jump with savage-wow.

    They're pretty much unbreakable as long as you land on the wheels
  2. Upbasher

    1st ever jump with savage-wow.

    I'd be more worried about engine mounts than the body. In fact I rarely ever run a body on my savage
  3. Upbasher

    1st ever jump with savage-wow.

    To encourage you, you know the savage can take 10x that abuse you were doing, right? You can jump it a LOT higher than that, just make sure to land on all four and you're good!
  4. Upbasher

    1st ever jump with savage-wow.

    YEAH!!!! Bash it up!!! Good, work, man
  5. Upbasher

    Savage X and Mud

    It will be fine as long as you put something over the air filter to keep water off it. And don't go over the bottom of the tranny, I'd say
  6. Upbasher

    Engine Guard for Savage 25

    The stock X roll bar will fit with no mods, if you have the stock 21/25 plates
  7. Upbasher

    Engine Guard for Savage 25

    Yes it will fit. The savage x roll bar will work fine on a savage 21 or 25
  8. Upbasher

    Operation new heartbeat

    Holy crap the Pope is back!!!
  9. Upbasher

    One Way Bearings and I do not get along...

    YES! With the pullstart installed, the external owb like is on your truck (I'm assuming) will easily last 5 times as long. Porbably more. If you get a really good one and clean it a lot it may last as long as the engine. Its possible
  10. Upbasher

    Engine cuts out

    Set the truck on a block of wood so the tires are off the ground, and raise the idle to just before the wheels start spinning. Set it so the wheels are spinning very slowly and then back it off about 1/4 turn
  11. Upbasher

    Savage X engine upgrades??

    I'm not sure. Post a picture of the stock body that came with the truck and I'll tell you. As for the tranny gears, I don't know, I couldn't find them either. I was just saying, you know, if you find them get em. I've eaten second gear twice within like 5 tanks, just with the lrp 28
  12. Upbasher

    Savage X engine upgrades??

    Well, the new bp diffs will hold up. You may want to upgrade to flux dogbones and drive cups...try and find some all steel tranny gears, because second gear may not last through one tank...lol if its plastic in there And you will for sure need rrp spur and clutchbell, because you'll shred...
  13. Upbasher

    Savage X engine upgrades??

    THe LRP 28 is awesome and so is the ofna force .28. Both are fantastic engines The LRP .30 spec 2 seems to have all low end torque, its not much for speed, as found out by pin it ot win it, but man does it have torque, theres no stopping it. You will need bp diffs, and robinson racing gears to...
  14. Upbasher

    at a loss....

    The Tekin Rx8 just won readers choice awards...try that maybe.
  15. Upbasher

    Installing flywheel / clutch bell, but drive shaft hangs out of clutch to far? w/pics

    Actually that is perfect the way you have it. Hpi makes little brass bushings that are made specifically for this that take up that play. don't put washers behind the collet, you'll never get the bell and spur to line up right if you do
  16. Upbasher

    savage x 4.6 engine warranty

    Haha people do that all the time on the trx forum
  17. Upbasher

    savage x 4.6 engine warranty

    Dude why'd u post this thread twice???
  18. Upbasher

    savage x 4.6 engine warranty

    Well thats totally possible also hop but sometimes it is the company's fault. Stupid question, xclandon, but is your tank completely sealed? If its got a leak then it will never run right
  19. Upbasher

    savage x 4.6 engine warranty

    Yeah I hate that. Make sure it covers it and then bam!! Have at it. Slap that thing in and see how hot ya can get her
  20. Upbasher

    savage x 4.6 engine warranty

    Well ya know blowing up a mill is fun especially if you have a good excuse to. I would read up on HPI warranty and call that guy back, see what exactly he's going to do with it and what you will be charged if it is and if it isn't blown up.
Back
Top