Search results

  1. K

    My Rear Wing

    Thanks Jester Yes made it and fitted it in the shed last night This is my RTR x4.6 over the week end i will be adding the stainless steel breaks. hardened 17tooth clutch bell and a 47 tooth steel spur gear also my mate is going to paint a desert rat (pro line) shell for me will post photos...
  2. K

    My Rear Wing

    Hi Just thought i would show you my newly fitted rear wing new rims ,throtal mod and sway bar Thanks
  3. K

    breaking in a k4.6

    well all is good checked carb settings were factory and let it run around on the ground not going above 1/2 throttle smoked always coming out of the pipe run it for 15min then check temp 215F it ran at that temp for 3/4 of the tank after that i shut her down will run it in again next...
  4. K

    Parker's pride and joy.

    Hi hey parkermarsh what shell is that grey and green one you painted
  5. K

    breaking in a k4.6

    Thanks for the info i got a new 4.6xss but used a new k4.6 i got of ebay (never been used) i set all the needles to factory before break in might have them check them again it was spiting out a lot of oil on the first tank
  6. K

    breaking in a k4.6

    Hi i have just started to break in my new k4.6. The first thing i noticed was the engine temp was running at 248 it was holding 221 for a while then jumped up .wheels are off the ground (idle is smooth and non fluctuating) i was running my savage (high speed passes )with the f4.6 while the...
  7. K

    Share your crash damage pics!

    Hi i just brought new savage 4.6xss. So that leaves me with a spare k4.6. Got the motor mounted on a spare savage motor mount and just for laughs i test fitted it to the mt2 to my surprise it fitted (will have to drill 4 new holes for motor mount ) .I even tried the polished exhaust it fits...
  8. K

    Share your crash damage pics!

    Hi its only a nitro star 18SS
  9. K

    Share your crash damage pics!

    Hi I was testing out the quarry where we run our cars with my nitro mt2 (before i unleash the savage ) .Every thing was going fine when the car just died i thought this cannot be good .After i pulled the engine i found i had cracked the crank shaft in half .What makes it worse i have looked...
  10. K

    F4.6 And K4.6

    OK i ended up getting pro line crime fighter 40 series tyres and a set of pro line bead lock 40 series rims the car sits lower now took it out on the weekend and handled great but (always a but) didnt wheelie at all and every time i turned sharp one way the engine would cough and splutter...
  11. K

    Hpisf Savage Mkii

    Hi what is the thing stuck to the top of the battery box looks like a IR receiver?
  12. K

    F4.6 And K4.6

    now i can turn the savage at some speed would these tyres and rims affect the driving of the savage (good or bad) http://www.prolineracing.com/p-342-velocity-6-40-series-chrome.aspx http://www.prolineracing.com/p-297-big-joe-40-series.aspx Thanks
  13. K

    F4.6 And K4.6

    Thanks for the info guys i removed the spacers today and took it for a run it didnt even look like rolling didnt even get on two wheels the engine i got hasn't been started yet but come with a aluminium pipe, header and fuel tank it also has the vented 17tooth clutch bell
  14. K

    F4.6 And K4.6

    Hi i have tried using the hole towards the centre but will remove the shock spacers tomorrow and give it a go i have noticed the foam inserts in the tyres move a bit as i am always pushing them towards the centre Thanks
  15. K

    F4.6 And K4.6

    Thank you yes i joined this forum the weekend i got the savage and read the break in tutorials now i am trying to get the savage to turn a corner with out tipping on two wheels or rolling over Thanks
  16. K

    F4.6 And K4.6

    i brought a savage RTR 4.6 (uses a F4.6 engine)a couple of months ago. It has been going great i got a near new K4.6 off ebay as a spare and was wondering what is the better engine. I have noticed the K4.6 has a mid range needle adjustment on the carb and a different crank case Thanks
Back
Top