Japan RC Magazine
JoeGuam and OS .25 AB Mods makes it into the RC Magazine in Japan 2011 June issue.:nod:
Of course because of the language barrier the interview was painstaking but the AB Mods OS.25 stole the show and got a lot of attention. The article was taken during the Truggy A Main...
I do not own one but from my observance the LRP .28 Spec3 is a badass engine stock and better buget motor. I do own a Picco .28 and couldn't be dissapointed. There are many people that had issues when they go to turn needles. Nothing wrong with the Engine but it takes some understanding to...
Stock is a good reference point. Your manual will indicate how you can adjust your shift points based on your needs and motor. I tend to change my shift points depending on the area space where I run. But your motor is a big contributor in deciding shift points.
I usually take a sand paper (400) and roughen up the area of where the tire/ glue will set. Then I remove any residue on the tire with alcohol and/or brake cleaner. This prep work has proven to be a success.
+2, Green Slime works awesome especially if you want to adjust the midrange. In reality the midrange neelde adjustments will make a big and positive difference in performance.
I hate to burst your bubble but a NIP servo at $20 is not going to help much but give you headaches. I suggest looking for a servo no more of .18 speed and no less than 180 in torque (basically for brakes). Just my recommendations. Save up for a better servo over the $20 range, you might want...
Any part in my eyes can break, some sooner than others. I have seen customed Savages built here in Japan with the shock towers and skid plates as shown and have yet to see any if it break.
I had this happen to me a while back. It could numerous things but in my cae the ESC board was dirty. I wasn't worried of voiding my warranty by removiing the sticker and opening it up. I looked at the ECS board and it was dirty! So I cleaned it up with contact spray. It worked like new. If...
I say get contact spray and clean all your electronics. WD 40 will work!:cheers: I would go as far as using Marvel Mystery oil to clean out your motor, Remove your front engine bearing seal and blow it out with air and reinstall. These are all going beyond the already mentioned...
This was the wing that was featured at the Buggy Worlds 2010. Mugens team drivers from Japan were given several at the worlds and had some left overs. I just happen to be at the track when the team arrived back from the worlds and Kenji Osaka, Mugen's main driver gave me two. I am just the...
What I have tested lately and instead of using the ever popular Dynamite Max life with 1.0 spring was to try another set up. which is cheaper and gives to options better performance fromthe punch through holding power of max RPMs down the straights.
I know the prices between the US and Japan...