Search results

  1. M

    FLM mid tank mod is AWESOME!!!!!

    I just got the FLM mid tank done with an OFNA 250cc tank. Today was the first time firing up the truck for the season. Half tank lean is definitely a thing of the past. And as for run times. WOW. I wasnt paying attention to the clock but Id say at least a half hour. I just wanted to give a...
  2. M

    Why is my motor constantly running at 300 degrees

    Hey guys. Finally got my FLM mid tank done. Its freaking awesome!!!!!! I am using a OFNA 250cc tank and the run times go on and on and on! Anyways, I got the truck last year and could never get the 4.6 under 290 but i was running it in 80+ degree weather. So, today was the first run of the...
  3. M

    Hitec Aggressor SRX 3-Channel FM

    I'm looking for a new radio system. If you've been reading my posts, Ive been having so much trouble with my Futaba 3PM-FS that I am giving up and looking for a new system. RCplanet.com has the Hitec Aggressor SRX 3CH FM and it comes with the HS-645MG servo. I need to upgrade my servos anyway. I...
  4. M

    Video of servos not working... Please help

    Ok so I thought that a video may shed some light on what is going on with my truck. This is my first video btw so be gentle. Give me some feedback on what you think the problem is. Servo problem? Receiver problem? http://www.youtube.com/watch?v=1M1AYeVTRCA
  5. M

    Help! Servos aren't working when hump pack is plugged in

    Ok so I just got done doing a FLM mid tank with a 250cc tank. I also replaced the AA batterys with a hump pack (2600 MaH from www.onlybatterypacks.com). I charged the pack and plugged it in. Turned the switch on and nothing happened. I turned it off and back on again and my throttle servo gave a...
  6. M

    FLM motor mount?

    Hey guys, I am in the middle of the FLM mid tank with a 250cc tank and ext tvps. Is the FLM motor mount necessary? Or can I stick with the stock hpi mount. Reason is because I stripped one of the hex screws on the hpi mount and now I can't get it off. I tried to mount the stocker onto the flm...
  7. M

    striped a hex screw on the engine mount... HELP!

    Hey guys, so I am in the middle of doing a flm mid tank mod with a ofna 250cc tank. I went to take the old engine mount off of the 4.6 and put the flm one on. Well, I striped one of the hex screwes. Now I can't get it out. What do you guys do when you have a striped screw? A special tool? Throw...
  8. M

    EZ Start on a savage?

    Hey I saw a picture somewhere on the forums that had an electric starter from traxxas on a savage. Is this possible? I have no idea how these things work. Sorry if this is in the wrong section, I didn't know where else to put it.
  9. M

    Nitro fuel sat all winter, is it still good/

    I can't remember the brand of fuel off the top of my head(I am not home right now so I can't go look). But anyways, there is a half gallon left, and it's been sitting since November. The top is on tight and its in a cool, dark part of my basement. It's on carpet as well. The bottle is white so I...
  10. M

    will 250cc tank fit with stock shocks?

    I want to do a mid tank. I have been looking at the ofna 250cc conversion. My question is, will the tank fit with the stock shocks? All the pics I have seen in the forums have aftermarket shocks. Also, from the searches I have done, the TVPs used are from FLM or PRC. I like the PRC kit but will...
  11. M

    Mt. Pleasant, MI area???

    Hey everyone, I'm new to this site and new to the Mt Pleasant MI area. Sure could use some fellow savage people to bash with! let me know...
Back
Top