Search results

  1. chimeraxp

    big block RS4

    I'll post some pictures when I get home tonight The main problem is the braking system Wolfpack radicals I think the name is emailed me back For 60 us comes with the motor mount flywheel and cone I'm not sure what's the cone for but I'll see later Will be a fun build I think.
  2. chimeraxp

    Chimeras FLM Midtank

    been awhile since I posted , thought I would post up here . the whole things works really really well , I wish I did a mid tank months ago now . I will be doing a mid tank to my other now since mine runs like night and day. I haven't broken down and bought a battery mount yet , I have just...
  3. chimeraxp

    big block RS4

    I know it's not a savage , but HPI still , I'm doing a RS4 super Nitro Big block conversion . I can figure out the motor mount issue . but the flywheel is a whole other problem. I've talked with wolfpack and he has the parts I need but i'm cheap and if I can find a working part then thats...
  4. chimeraxp

    WTB Looking for Offroad wheelset + tires

    I have a set of 40 size moabs that I was thinking of selling , I'm in calgary only been ran a few times , twice on gravel and once on grass.
  5. chimeraxp

    Upgrade Engine Mount?

    I have the FLM one and love it
  6. chimeraxp

    Project XLLL

    :machinegunner: ah booo I love the smell of nitro
  7. chimeraxp

    Project XLLL

    nice build bud , not a Flux guy my self but I'll be watching this one .
  8. chimeraxp

    Hot Bodies Shaft

    I couldn't tell you what springs came with them I had Silver I think , I know the stock caps use a different bladder system , O-rings rather then bladders , Everything else seems to be working ,. Problem I was also having was they would keep popping off the top mount . I think thats how I bent...
  9. chimeraxp

    four bevel diff gears

    What kind of savage do you have ? thats a good start . unless you know for sure what truck you have , if you bought it used then most likely you will have to pull the diffs , which isn't a bad thing . if you have had your truck for a bit , gotta learn how to rebuild them anyways . better to...
  10. chimeraxp

    3 speed with reverse ?????

    removing it is by far the best and safest way , you could be like me and just unplug the servo Doesn't help top end though , and I good jump rock or what can slid your linkage and blow up your transmission , I would just remove it and be done with it , :pannedout:
  11. chimeraxp

    3 speed with reverse ?????

    best bet is to download the manual for the reverse from hpi reverse process to remove it , it's rather simple , you may need one part to cover the hole hole and a screw.
  12. chimeraxp

    Where do you live (ZeeMaps)

    make that 3 Canadians 2 Americans
  13. chimeraxp

    Drilling Holes in the Wheel

    years ago i used to drill holes but haven't for some time now , most rims comes pre drilled now.the last set i counted 4 holes .that being said i still have my tires expanding.duck seems to work for buggy guys but I don't know how it works for MT tires.
  14. chimeraxp

    I need help fitting right tire size to wheel

    also don't forget the 21 and the 14mm hex hubs , you might want to ebay a set of 17mm adapters as well
  15. chimeraxp

    How can I tell if I have half tank lean problem?

    when you reach the lower half of the tank this is when you will see your truck start to lean out , you can tell either by sound, smoke or temperature increase . what a most do to avoid the HTL is to run a richer setting then they aren't hurting the motor at all . by the sounds of things your...
  16. chimeraxp

    time to upgrade my servo or just replace gears?

    I have yet to break anything on my 7955TG , and i'm not too worried about it either , I think I would have to do something rather dumb to break it , but thats just me , others may have. but I'm not doing LiPo or 7.4 volts .
  17. chimeraxp

    New to nitro

    nice looking truck , the 086 is a good bashing pipe I think . I would save on the three speed and see what else you want first . I don't like reverse my self and have just learned not to get in to tight spots anymore .
  18. chimeraxp

    time to upgrade my servo or just replace gears?

    I run the 5955TG it's a couple years old , discontinued now , I believe looking at the specs it was replaced 7955TG , I really enjoy mine and would buy another if the price was right .
  19. chimeraxp

    Well, well, well, what the FLUX do we have here!

    nice looking truck , what rx box did you use ?
  20. chimeraxp

    My first savage..

    i have a set of tires I got really cheap a few years back , one was tore , I sealed it up with some shoe glue I think , I only use them for bashing and they have held up fine . . but for just for me I moved the tore side to the inside of the rim.
Back
Top