Recent content by xxz28xx

  1. X

    No power to my rear wheels

    i had a similar problem. turned out to be my front diff ate some teeth, but that was after 2 years of bashing on the stock diffs. see if you can pull the little rubber caps off and look into the tranny to possibly see crap flinging around in there.
  2. X

    Old Nitro Fuel

    i had about a half gallon of fuel from a year ago that i have been using recently. i shook it up, used it, and it hasn't given me any problems.
  3. X

    South Florida!!!!

    my family lives in boca raton. anyone ever been to the RC track in that park off of yamato and 441 i believe? ill be going down there this winter if anyone wants to hook up and bash.
  4. X

    Stripping plastic threads?

    Like JB weld? How bout epoxy? seems like it could get ugly...
  5. X

    Stripping plastic threads?

    Has anyone had problems with stripping the threads that hold the TVPs onto the radiobox, transmission, and things like that? It seems to me that having the roll bar screws screw into plastic wasnt a very good idea... My roll bar takes quite a bit of beating and some of the threads seem to be not...
  6. X

    Whats the best ????

    i wrecked the teeth on a servo horn once by just putting it on without the teeth lining up perfectly. those teeth are weak so I just forced it on and basically made my own teeth lol. still works to this day, i just have the steering trim adjusted funny.
  7. X

    steel spur gears

    https://www.hpisavageforum.com/forums/showthread.php?p=26346#post26346 Read that, these fellas helped me 100%. I ended up replacing the clutch with a vented one, and the bearings that the clutch rides on. I still use the plastic spur and I have put at least 8 tanks thru it since. I would burn...
  8. X

    More Spur Gear Issues

    I had the same issue once too. What I did was rotate the slipper clutch hub, hub key (the little metal rod that hold the clutch hub in place) and slipper clutch plate around untill the wobble went away. Since each of those pieces can go on 2 ways, each 180 degrees apart. Do you know what I'm...
  9. X

    Share your crash damage pics!

    haha i wish, well i wish it was before it was wrecked. but i was saying that i did some damage to my dads truck and it ended up looking like that one...
  10. X

    Share your crash damage pics!

    i ran into a mailbox post full speed, hit it dead nuts on the control arm on the right side. kinda looked like that... good thing it wasnt my truck, but my dad was piiiiiissed....
  11. X

    Share your crash damage pics!

    The hood scoop is actually functional on this one?
  12. X

    Share your crash damage pics!

    wow...twin engine too... looks like it got into a fight with a car...
  13. X

    Anyone ever seen/used these TVPs?

    will the savage x tvp's work with my savage 25? do I need any other parts to make it work? remember, i have rotostart.
  14. X

    Anyone ever seen/used these TVPs?

    After doing a little reading on those HPI TVPs, I get the feeling that I won't be able to use my Rotostart with it. I have a regular savage 25, anyone have an idea if rotostart can be used with the LCG TVPs or do I have to stay with the non-LCG?
  15. X

    Anyone ever seen/used these TVPs?

    http://cgi.ebay.com/GPM-HPI-SAVAGE-21-25-RTR-4-6-ALLOY-3MM-CHASSIS-PLATE-S_W0QQitemZ6060613368QQcmdZViewItem http://cgi.ebay.com/Integy-Savage-HD-4mm-Aluminum-Chassis-Side-Plates-25-SS_W0QQitemZ6049368755QQcmdZViewItem...
See more
Back
Top