Recent content by FastPete

  1. F

    Savage X Cracked engine plate

    Hi, I was cleaning and shimming my diffs,and noticed by one of the engine mount screws the purple engine plate is cracked.I think it will be ok for another weekend,but is this common? And is there a better one,or just get a stock one again? Thanks
  2. F

    installed DX3S today

    I think you will find the MPH reliable once you get your RPM working right.Going to the track tomorrow will let you know how it goes.What kills me is I was on RC Tech giving the same info and questions and that Gary from Spektrum and hesitates to answer me and brushes off my info as it SHOULD be...
  3. F

    installed DX3S today

    Will do as soon as I get a camera.Just to let everyone know I got the RPM working great.They need to add this to the instructions.Theres a green light in the reciever that comes on when the gap is good.Just tightened up the gap till the green light came on.Then glow plug out turned it over and...
  4. F

    installed DX3S today

    Think I figured out the throttle works every time with the return spring off.Must be the servo huh? Too late to mess with the RPM
  5. F

    installed DX3S today

    Yes have a hump pack 7 volts charged up.Thanks for the tip on the RPM will let you know. Any ideas on the servo problem? Bank can I call you Bank? I don't know if I can change the frame rate don't recall seeing that.
  6. F

    installed DX3S today

    End point fine on the throttle servo.I wonder if the stock servo is bad.Maybe it was always doing this.Go slow its fine,smash the throttle it shutters at 3/4.Also if you slowly get it to full throttle and just blip it to 3/4 to full again it just shutters at 3/4 wont go back to full throttle...
  7. F

    installed DX3S today

    No I'm going to check the throttle end points now.The steering works great.
  8. F

    installed DX3S today

    Thought I did will double check. Do you think the battery voltage could be a problem? I will get different ones I guess. Any ideas on the RPM issue?
  9. F

    installed DX3S today

    Hi,Well installed my DX3S today.All works good except a few issues. No RPM,I had to modify the braket a bit to get on my savage.Has a shiny flywheel so installed a black dot.I set the air gap just under 1/8 " like the instructions say.It said 480 RPM for a split second now 0 all the time...
  10. F

    First time racing

    Thanks Joey.Have 10K in the shocks and its cold here also.I picked up a DX3S today.Hope that works out.Anyone have this on their savage? Any picks of it installed? Installed RPM front controll arms today.Hope they hold up better. Installed the bearings also seems smoother. Pete
  11. F

    First time racing

    What is exponentials? Panthers with small numbs.Not sure of the name. I see what your saying about the D3XR being better,but will it make a diff to me? Think I will ever use it to its full potential? Plus its about $100 more right? Sorry for all the questions just trying to learn.I'm...
  12. F

    First time racing

    So you say the futaba is better? Tell me before I buy one. One gallon. Should I change the diff oil to a different weight? Will it help me at the track on hard clay?And what weight? And my truck came with 17/47 gearing an I changes to a 18 bell.It always stood up and flipped on the...
  13. F

    First time racing

    Stock.I thinking about the spetkrum whats your thoughts? What will I see from it? Also never done anything with my diff oils.Will that make a big diff on clay track? And what would you guys suggest? Probably going to go get this stuff tomorrow. And should I shim the diffs also? And...
  14. F

    First time racing

    Well just got back from the track was alot of fun.I got some learning-praticing to do.Much different driving on the track verses bashing.Had a hard time keeping it straight.Finished up the night hitting the wall and snapped the upper n lower controll arm LF.Big Bore shock is fine.Steering seems...
  15. F

    First time racing

    Also this section is dead is there any savage racers out there? Would love to see some pics of yours set up for racing!
Back
Top