Recent content by F250saleen

  1. F

    Hitec 645mg better than sf-5?

    Will there be a noticiable diffrence in turning power?
  2. F

    Hitec 645mg better than sf-5?

    I have a question is the hitec 645mg servo better than the stock servo the savage xl has? Thanks lmk
  3. F

    FS: JP3 Pipe, Cheap Servos, Integy Tools

    Ill take that jp3 pipe if you still have it lmk. Thanks
  4. F

    Shifting from 1st to 3rd possible?

    Can i adjust the shift point from the side of the case or i have to open it to get 1st to engage? Thanks lmk
  5. F

    Shifting from 1st to 3rd possible?

    Yea it does lack bottom end I'm ussing the same gearing i had on the 5.9 52/17 and the 5.9 had alot more punch. How do I set the 1st speed? Thanks lmk
  6. F

    Shifting from 1st to 3rd possible?

    Hi my savage xl had a recent engine swap to a lrp .28 now that the break in is over the truck was not shifting at all. I took my truck to a guy who fixes them and now its shifting but only once. The truck has pretty good speed so my question is is it possible its shifting from 1st to 3rd or am i...
  7. F

    Savage wheels moving while cranking it?

    Hello I was out bashing my savage it fliped over and shut off. So i went to crank it with the rotostart and while cranking it the tires will spin whats up with this? Any thoughts thanks lmk.:texas1:
  8. F

    Hpi bearings no good

    So thats 22 bearings is that all the truck not including the tranny gears? I think I will try them out and see how I like them. thanks guys for you great input I appreciate it.
  9. F

    Hpi bearings no good

    Hey robsmith I see that the bearings that are a buck a pop are the metal and the rubber ones which one do you use? Also do they sell a complete kit or you have to piece it one by one? Thanks lmkhpisfgreen
  10. F

    Hpi bearings no good

    So is this the kit I need it says its 30 bearing set will these last the life of the truck? And will this kit replace all bearings? http://www.bocabearings.com/bearing-inventory/17580/rc-car-truck-bearings/green-seal/hpi-savage-xl-complete-w/steerin-nitro-off-road
  11. F

    Hpi bearings no good

    I know boca bearings are one of the best but i don't want to spend a fortune.
  12. F

    Hpi bearings no good

    I have ran 2 gallons on my savage xl and needed to replace diffs because a front diff case bearing gave out and had play and stripped a pinion. Ok i went and bought the bp diffs and new bearings also the 5.9 pos threw a rod and bought a lrp .28. Now while assembling it i decided to remove the...
  13. F

    Engine locked 5.9k

    Thanks guys for the help i really appreciate it. Hey MikeK1981 how do you like that end bleed pipe? I want a pipe that will scream loud and also good preformance thanks.
  14. F

    Engine locked 5.9k

    On another note I'm going to order my engine through tower hobbies but do you guys know if tower sells the shims to shim the diffs to install the bp diffs thanks lmk.
  15. F

    Engine locked 5.9k

    Hey mikeK1981 does tower hobbies sell those shoes? Do you have part numbers? Thanks lmk
See more
Back
Top