Recent content by EAC-ISR

  1. E

    Stock Radio Melted

    I'm USING THE SANYO 700 NICD RECHEARGABLES,I THINK WHAT I DID WRONG IS LAST TIME I FULLY CHARGE THEN USED FOR ABOUT 15MINUTE THEN PUT IT BACK ON THE SHELF THEN AFTER 3 WEEKS OF NON USE I RECHEARGE IT AGAIN MAYBE I OVER CHRAGE U THINK?THANKS
  2. E

    Stock Radio Melted

    OK GUYS LAST NIGHT I CHECK MY RADIO, I TURNED ON MY RECIEVER AND TX IT WAS WORKING FINE,THEN I TURNED BOTH OFF,I FAST CHARGE THE TX FIRST THEN MY RX,THEN I WOKE 7 AM SO I CAN BASH AND WAKE UP MY NEIGHBORS,I TURNED MY RX ON IT WAS FINE THEN I TURNED ON MY TX I NOTICE RED LIGHT DOESN'T GO ON SO I...
  3. E

    Spur Gear Bearing

    I Had One On My Old Savage Before,and It Work Good It Reduces Friction And It Will Help For A Smoother And Faster Acceleration.
  4. E

    Spur Gear Bearing

    Anyone Knows The Bearing Size For The Spur Gear?i Wanna Change The Brass Thing To A Bearing.thanks
  5. E

    Sts 28

    have u check the screw that is holding the clutch hub that might be lose,other than that the motor might not be reaching enough rpm to engage to second,are u running stock clutch?it could be slipping making the engine rev high but doesn't transfer the power to the tranny.as for cuttting hole on...
  6. E

    Sts 28

    HAVE U TRIED ADJUSTING UR TRANNY?ALSO U MIGHT WANNA KEEP UR TEMP LOWER,BUT YEAH TRY ADJUSTING UR 2SPEED IT MIGHT BE SET ON LATE SHIFT .
  7. E

    aluminium clutch shoes...plse help

    I HAVE THE SAME CLUTCH SET UP LIKE U DO,I HAVE A STS.28 MOTOR,WHAT DO U SUGGEST SHOULD I REMOVE THE HEX SCREWS AS WELL?OR SHOULD I JUST GET A STIFFER SPRING?THANKS:confused:
  8. E

    Sts 28

    IF U DON'T MIND ME ASKING,DO U KNOW WHAT IS THE FACTORY NEEDLE SETTINGS ON THE STS.28?ALSO DID U NEED TO CHANGE UR CLUTCH SPRINGS,I HAVE THE PURPLE 3 SHOE ALUMINUM W/THE SPRING THAT CAME WITH IT BUT IT SEEMS LIKE IT ENGAGES ON IDLE WITH MY STS.28,MYABE CAUSE I HAVEN'T GOT TO FINISH THE BREAK IN...
  9. E

    15t Cb With A 51t Steel Spur Gear

    OK THE K4.6 ENGINE I CAN GET FOR $150 SHIPPED TO ME AND THE GIGHEST PRICE FOR THE K4.6 IS $195SHIPPED AND FOR THE 30VG I CAN GET $220 SHIPPED TO ME W/THE PULLSTART ASSEMBLY.I ALSO A TRUCK DRIVER BUT I ONLY WORK 40-50 HOURS A WEEK.HOPE THAT HELPS
  10. E

    15t Cb With A 51t Steel Spur Gear

    OK COOL THANKS
  11. E

    15t Cb With A 51t Steel Spur Gear

    OH OK THANKS FOR THE INFO,HEY IF WANT TO BUY THE STS.28 IF U WANT U CAN SEND ME MONEY THROUGH PAYPAL TO ME AND ILL ORDER IT FOR U THEN WHEN I RECIEVE IT ILL SEND IT TO U ASAP, I GOT MINE W/PULLSTART FOR $120SHIPPED TO ME AND I THINKS ITS A LITTLE MORE IF U WANT THE ONE WITH ROTO BACKPLATE I...
  12. E

    15t Cb With A 51t Steel Spur Gear

    I Don't Get It Doesn't Having More Toothe On Spur Gear Or Cb Gives U More Top Speed And Less Acceleration?
  13. E

    15t Cb With A 51t Steel Spur Gear

    thanks for the quick reply,hopefully everything goes well with this set upwell thanks i will update on the result.thanks
  14. E

    15t Cb With A 51t Steel Spur Gear

    Anyone Tried This Combination?what Would Be The Result?I'm Going To Use The With My Sts.28 Motor?thanks
  15. E

    STS .28 Roto start on savage

    THANKS FOR THE REPLIES JRSTORM,THATS A GOOD THING TO HEAR,I CAN'T WAIT FOR MINE TO ARRIVE,THANKS AGAIN
See more
Back
Top