Savage X Flux wing mount options

[kelles]

Hey everyone, i am looking on installing a wing on my savage flux, for the looks and the added protection but couldnt find any direct fit options. Any ideas how i could go about this?

If there is no solution I'm thinking of making my own plate/base on which the wing mount will be fixed but i have no idea which wing mount to go for. In terms of height which wing mount will be the best fit? what about the TA RC8B4 buggy wing mount, also which brand makes the toughest wing mounts?

https://www.rcfox.de/en/AE81552-Team-Associated-RC8B4-Wing-Mount

something like this
https://www.rcuniverse.com/forum/hp.../7854934-savage-hellfire-wing-mount-base.html

 

[kelles]

Is this forum as dead as it looks?

 

[fbernd]

Hi
You’re right. It’s not very active.
I fitted the wing of the TROPHY TRUGGY FLUX.
I attached / stewed it to a glas fiber plate (approximately 4mm). Cuttet the plate in shape of the shock towers. So that I can stack the adapter plate and the shock tower. The plate is mounted with slightly longer screws with the shocks at the tower and at the base of the tower.
Perhaps I can find a picture.
Greetings from German
fbernd

 

[kelles]

Hi
You’re right. It’s not very active.
I fitted the wing of the TROPHY TRUGGY FLUX.
I attached / stewed it to a glas fiber plate (approximately 4mm). Cuttet the plate in shape of the shock towers. So that I can stack the adapter plate and the shock tower. The plate is mounted with slightly longer screws with the shocks at the tower and at the base of the tower.
Perhaps I can find a picture.
Greetings from German
fbernd

Thanks for the reply, I'm thinking of ordering a piece of carbon 5mm thick and do the same. Any idea what is the best way to cut and shape carbon fiber?