Rotostart tool

[Rsxnick02]

I have a brand new hpi 5.9 engine and the rotostart tool seems real weak and it wont start truck any help?

 

[ljrce]

Is your roto start battery pack fully charged if so may want to preheat the motor with a hair dryer

 

[Rsxnick02]

I let it charge for a while I'm gona let it charg over night hopefully it will do

 

[ljrce]

if not with it being a brand new motor you may have to preheat it to make it fire easier then once its broken it shouldn't need to preheat

 

[Rsxnick02]

Ok will do thanks man

 

[Jam Racing 1]

ya them chargers only charge at about 1 amp or so, it may take 12 hours or more to reach full charge

 

[X]

As long as you are VERY careful and know that nothing is wrong with your motor you can use a drill with the roto-start bit.

>note: this message does not condone cranking up the torque on your drill and demolishing your new motor, use at your own risk<


lol

 

[xtremsavage]

If it's not the battery and the motor is that new, you can also loosen the glow plug just a little to help crank the motor. Then, as soon as it fires, pull the igniter off and tighten the plug back up.

 

[Rsxnick02]

Got her goin on second tank thanks for the help guys