rjsl-xl
Active Member
- Messages
- 53
Using alot of the same parts as my xl build.
Integy HD uprites and hubs modified for better turning
Integy HD rear tie rod eliminator hubs
Integy 17mm +6mm wheel extenders
Integy HD Heatsink Engine Mount
OFNA Jamin X1-CRT shox
PRC TVP's
PRC skid plate
PRC LCG shock towers
PRC engine plate
PRC bulk head plates
HPI Helfire body mounts
HPI adjustable upper controll arms
HPI Flux diffs dog bonze and cups
HPI HD Servo Saver Spring and bearing's
HPI C/F Bulk Head Braces
HPI Sway Bars
HPI D8 wing mount with Pro Line high downforce wing
PROLINE FORD RAPTOR BODY
HPI 2 Speed Tranny
Losi truggy wheels and XXT tires
Losi 1100mah battery and holder from Aftershock
RPM small radio box
ACE DS1015 Steering Servo with FLM mounts and custom mounting plate
Savox SC-1258tg Throttle Servo with FLM mounts
CEN 220cc Tank
RC Screws S/S screw kit
SH PT28xM-P8 Engine moddified by Robin at ERCM
ERCM 221T Custom Pipe with the one piece mount and OFNA 086 Header
MOTORSAVER Air Filter
Will update as the work goes along, here is what I got done today.
Integy HD uprites and hubs modified for better turning
Integy HD rear tie rod eliminator hubs
Integy 17mm +6mm wheel extenders
Integy HD Heatsink Engine Mount
OFNA Jamin X1-CRT shox
PRC TVP's
PRC skid plate
PRC LCG shock towers
PRC engine plate
PRC bulk head plates
HPI Helfire body mounts
HPI adjustable upper controll arms
HPI Flux diffs dog bonze and cups
HPI HD Servo Saver Spring and bearing's
HPI C/F Bulk Head Braces
HPI Sway Bars
HPI D8 wing mount with Pro Line high downforce wing
PROLINE FORD RAPTOR BODY
HPI 2 Speed Tranny
Losi truggy wheels and XXT tires
Losi 1100mah battery and holder from Aftershock
RPM small radio box
ACE DS1015 Steering Servo with FLM mounts and custom mounting plate
Savox SC-1258tg Throttle Servo with FLM mounts
CEN 220cc Tank
RC Screws S/S screw kit
SH PT28xM-P8 Engine moddified by Robin at ERCM
ERCM 221T Custom Pipe with the one piece mount and OFNA 086 Header
MOTORSAVER Air Filter
Will update as the work goes along, here is what I got done today.
Last edited by a moderator: