Londoner
c0ckney geezer!!
- Messages
- 973
- Location
- London, UK
Thought this may help other members, myself included in the future, when my manual eventually decides to go walk about. These are the parts needed to convert your HPI Savage into a Racing Suspension Conversion Savage!
85230 - Rod end set. 7x45mm. (the plastic ends of upper adjustable arms) qty x4 Link
86144 - Ball. 6.8x8x3mm. (the pressed in balls at the ends of upper arms) qty x4 Link
86370 - Left spindle carrier. qty x1 (includes 1x Z793 & 1x 86377) Link
86371 - Right spindle carrier. qty x1 (includes 1x Z793 & 1x 86377) Link
86372 - Left spindle. qty x1. (includes 1 x Z793 & 1 x 86377) Link
86373 - Right spindle. qty x1. (includes 1 x Z793 & 1 x 86377) Link
86374 - Upper arm brace. qty. x1 (the upper brace that fits in the bulkheads) Link
86375 - Rear hub carrier, left. qty x1. (includes 2x 86378) Link
86376 - Suspension shaft. qty x4. (lower arm mounting pin) Link
86377 - Flange pipe. qty x4 Link
86378 - Spacer. 4x8x6.5mm qty x4 Link
86384 - Rear hub carrier, right. (includes 2x 86378) Link
93617 - Turnbuckle. M5x35mm. qty x4 (upper arm turnbuckle) Link
Z224 - Washer. M3x8mm. qty x10 Link
Z243 - E-Clip. E3mm. qty x10 [Link
Z538 - Cap head screw. M3x25mm. qty x6 Link
Z548 - Cap head screw. M3x22mm. qty x12 Link
Z663 - Lock nut. M3. qty x6 Link
Z793 - Cap head screw. M4x10mm. qty x12 Link
Z819 - Aluminum washer, 3x6x3mm. qty x10 Link
I didn't bother listing the part numbers for the included allen wrenches, thread lock, etc. If you need a good set of allen drivers then check out the Bondhus ball-end drivers, top notch!
85230 - Rod end set. 7x45mm. (the plastic ends of upper adjustable arms) qty x4 Link
86144 - Ball. 6.8x8x3mm. (the pressed in balls at the ends of upper arms) qty x4 Link
86370 - Left spindle carrier. qty x1 (includes 1x Z793 & 1x 86377) Link
86371 - Right spindle carrier. qty x1 (includes 1x Z793 & 1x 86377) Link
86372 - Left spindle. qty x1. (includes 1 x Z793 & 1 x 86377) Link
86373 - Right spindle. qty x1. (includes 1 x Z793 & 1 x 86377) Link
86374 - Upper arm brace. qty. x1 (the upper brace that fits in the bulkheads) Link
86375 - Rear hub carrier, left. qty x1. (includes 2x 86378) Link
86376 - Suspension shaft. qty x4. (lower arm mounting pin) Link
86377 - Flange pipe. qty x4 Link
86378 - Spacer. 4x8x6.5mm qty x4 Link
86384 - Rear hub carrier, right. (includes 2x 86378) Link
93617 - Turnbuckle. M5x35mm. qty x4 (upper arm turnbuckle) Link
Z224 - Washer. M3x8mm. qty x10 Link
Z243 - E-Clip. E3mm. qty x10 [Link
Z538 - Cap head screw. M3x25mm. qty x6 Link
Z548 - Cap head screw. M3x22mm. qty x12 Link
Z663 - Lock nut. M3. qty x6 Link
Z793 - Cap head screw. M4x10mm. qty x12 Link
Z819 - Aluminum washer, 3x6x3mm. qty x10 Link
I didn't bother listing the part numbers for the included allen wrenches, thread lock, etc. If you need a good set of allen drivers then check out the Bondhus ball-end drivers, top notch!