-
Ask questions. Share your HPI Savage knowledge. Register TODAY!
Latest activity
-
DDazn replied to the thread FLM Ofna 250 Mid Tank Build.Quick update - the hex bolts and other hardware arrived along with throttle linkage components - so will hopefully get round to fitting...
-
LLeshill replied to the thread Carb upgrade question.Yep it fits nice and tight but I didn’t want to just crank it up in case I did damage to the HPI engine.
-
LLeshill replied to the thread Carb upgrade question.Picco engine has a button problem but other than that it’s good. If I could find another button for it I’d put the .26 Picco engine in...
-
Dzhugashvili replied to the thread Carb upgrade question.Picco is hands down a better engine. But 10 years ago when the sun shone nice and bright, the grass was always green and Picco made big... -
Dzhugashvili replied to the thread Servos in 2026.AFGRC makes nice servos. They make OEM servos for a couple of big names but also market their own now. The A73BHLW has a torque rating...
-
Oohsnap replied to the thread Carb upgrade question.I've never tried it, but if both carb necks have the same external dimensions, I don't see any reason why it would not work. My biggest...
-
LHi All, Savage 25 with .25 engine and the original carb as per factory. Carb rotates even when screw is tightened. On inspection, I can...
-
Dzhugashvili replied to the thread In Search for a transmitter and receiver for my Savage XL FLUX.I went with Futaba 4PM in the end. Not much of improvement over the 4PV but I am still very happy I went with the Futaba. Tnx for your...
-
Ccaptian_insano replied to the thread Factory Low CG chassis Build.Got a bit more done this evening before leaving for the weekend, mostly just washing and swapping around the front bulkhead. Need to...
-
-
DDazn replied to the thread FLM Ofna 250 Mid Tank Build.One more update - I'm not quite happy with the length of the hex cap bolts I'm using as I feel there should be some more thread being...
-
DDazn replied to the thread FLM Ofna 250 Mid Tank Build.I'm not sure if this angle will put any strain anywhere - but has anyone else come across this before?
-
DDazn replied to the thread FLM Ofna 250 Mid Tank Build.With the HPI standard XL TVPs a rotostart can still be used - so I have changed where I would normally come in to start the engine - and...
-
-
DDazn replied to the thread FLM Ofna 250 Mid Tank Build.So after mocking the build up - I got my rotostart and have found it is not long enough to reach the rotostart on the engine:
-
-
DDazn replied to the thread FLM Ofna 250 Mid Tank Build.Just need to figure out how to mount the battery and what to mount it to - am thinking mount a radio box to the left side TVP - or mount...
-
DDazn replied to the thread FLM Ofna 250 Mid Tank Build.Because the battery pack is quite compact - the battery lends itself to fitting here quite nicely:
-
