Latest activity

  • Gazzman
    Gazzman replied to the thread s25 starting issues.
    like ELWOOD & ohsnap said above it's probably the spring glued up or gone weak. Also pays to turn the pin round as the end which engages...
    • IMG_20260505_201741.webp
  • Gazzman
    Gazzman reacted to ohsnap's post in the thread LRP .32 4.1 OWB with Like Like.
    Yep. It doesn't hurt to have an extra OWB waiting in the wings either. Cheap insurance to ensure a quick repair.
  • Gazzman
    Gazzman replied to the thread Roto start.
    @frogeyeman Internal OWB are on quite a lot of mils, they are just as easy really to replace as one fitted to the outside, only 4 more...
    • DSCF2054.webp
    • DSCF2058.webp
  • O
    ohsnap replied to the thread LRP .32 4.1 OWB.
    Yep. It doesn't hurt to have an extra OWB waiting in the wings either. Cheap insurance to ensure a quick repair.
  • O
    ohsnap replied to the thread s25 starting issues.
    It looks like it's been sitting for a while with unburnt fuel that has coagulated. I'm real sure that the gunk is at the heart of your...
  • V
    Vinni replied to the thread LRP .32 4.1 OWB.
    Bet it wo already like that from new gutter were you based ? There in stock here in Uk
  • mklfy
    mklfy replied to the thread LRP .32 4.1 OWB.
    Looks like i gotta change it.
    • IMG_0196.webp
    • IMG_0198.webp
  • mklfy
    mklfy reacted to Vinni's post in the thread LRP .32 4.1 OWB with Like Like.
    You mite after get new 1 mate n av you cleaned it ? Mine started slipping almost from new add to clean 1 st time n add to soak it...
  • V
    Vinni replied to the thread LRP .32 4.1 OWB.
    You mite after get new 1 mate n av you cleaned it ? Mine started slipping almost from new add to clean 1 st time n add to soak it...
  • frogeyeman
    frogeyeman replied to the thread s25 starting issues.
    Thanks for your reply. Will give it a go,,the engine has been standing for a while. Seems a strange set up.
  • mklfy
    mklfy posted the thread LRP .32 4.1 OWB in Nitro Engines.
    I recently got a new LRP .32 4.1 for my savage XL, I haven't broken it in fully but had problems with the rotostart slipping, so I tore...
  • ELWOOD
    ELWOOD replied to the thread s25 starting issues.
    @frogeyeman I WOULD GET THAT PIN AND SPRING OUT TO SEE IF SPRING IS GUNKED AND THE HOLE THEY SIT IN. IF ALL GOOD I WOULD CAREFULLY...
  • frogeyeman
    frogeyeman posted the thread s25 starting issues in HPI Savage.
    Me again. On one of my s25 engines the roto start will not turn the engine. Removed the roto start back plate and the shaft that the OWB...
    • IMG_20260504_212044336_MFNR_HDR[1].webp
    • IMG_20260504_212143611_MFNR[1].webp
  • guinnessdublin
    Happy Days mate! 👍🏻😁
  • Gazzman
    Gazzman replied to the thread Has Anyone Had One Of These?.
    @guinnessdublin Yes the roto-start is exactly the same as the HPI #120277, even has the 2 dipples either side of the centre as the HPI...
    • IMG_20260504_195436.webp
    • IMG_20260504_195502.webp
Back
Top