Running in circles.

[RaiderHam75]

Is the Integy aluminum steering bell crank worth it? Or any aluminum up grade? I'm running a high torque servo but the steering just isn't there.

 

[rcaircraftnut]

Try replacing the bushings in the belcranks with bearings. I run a 300 oz servo. All stock otherwise. Mine turns great.

 

[RaiderHam75]

Try replacing the bushings in the belcranks with bearings. I run a 300 oz servo. All stock otherwise. Mine turns great.

Thanks I'll give that a try.

 

[parks450]

Try a different diff fluid as well. Maybe tighten your servo saver spring as well. If something is sloppy I would look into what is causing it, bearing, bushing, etc.

 

[Seanthemechanic]

Also run a hump pack battery for the electronics. You need more amperage! It makes a huge difference

 

[rcaircraftnut]

I run a 2700 mah li ion with an ultimate bec so plenty of power. As said above this is the MOST important ingredient in a good steering truck.

 

[olds97_lss]

Is the Integy aluminum steering bell crank worth it? Or any aluminum up grade? I'm running a high torque servo but the steering just isn't there.

What's your servo? "high torque" is somewhat subjective.

Also, what tires are you running?