Jonathanbree

[Jonathanbree]

This is my engine and bearing it may not be the bearing something is broke off in my shaft this is the part I need I think but don't know what it is.

 

[Jam Racing 1]

There is a pin and spring in the end of the crankshaft, can't tell by your pic but it is either broken or missing.... you can make a pin that fits out of a piece of music wire and it will work again......

 

[Jam Racing 1]

https://www.hpiracing.com/assets/documents/instruction_manuals/i1495-f46-glb-m-v1.pdf

check page 7 of that manual it shows the pin and spring part # 1433, you can get music wire to fit at most decent hobby shops and cut it and smooth the ends square so it replaces the lost/broken pin..... as I remember the pin is about 6mm long if that helps any...