Fs: 32" ToySport Triton -61821 PU/Shipped-

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.

300m

Well-Known Member
Messages
329
This boat was built by Joesph Toth in Europe.
It has full ToySport hardware with a fixed strut.
No need to adjust the strut, it is setup exactly where it needs to be.
There is a grease nipple on the strut for easy maintenance.
Castle 1717 1650 Traxxas XO-1 black motor (10 runs on)
HRC Water Jacket for 1717
Hitec Digital Waterproof HS-5646WP Servo
Custom by Toysport, Triton Stand - Quite awesome stand
.187 Toysport Flex shaft with 5mm to .187 set screw coupler... no slippage here!
8mm Castle bullets on Motor/esc, and 5.5mm bullets on the batts side..

It has Align battery straps that have been west coast systems epoxied in.
They arent going anywhere and neither are your batteries should you have an accident.

It also comes with an awesome "sock" for storing or transporting the boat, ultimately protecting it
from dings or scratches while transporting it. Also good for keeping the dust off the beaut.

There is 1 small chip on the left front of the bow with a tiny spit of spidering in the gel coat.
There is absolutely no structural damage at all.


It'll need a radio, ESC a x447 or x448 prop and of course a 6S LiPo that is atleast 5000mah.




I'm asking $425 shipped to the lower 48 for the boat ARTR.

Hull, Hatch, Hardware, Cable, Servo, Battery straps, Cover, Stand - $300 SHIPPED
Castle 1717 W/ HRC cooling jacket- $175 SHIPPED


 

Latest posts

Members online

Back
Top