maximusraylius
Well-Known Member
- Messages
- 2,123
hey guys I'm going to be offering up some polishing and de anodizing services for all your aluminum parts . they will have a mirror like shine . ill remove most if not all small machining marks and nicks in the parts from rocks being thrown at it from the tires ect.
heres a price list .. i think is a nice deal if you consider the time it takes to do each piece .. I'm basically working for free lol..
shipping ... $4.00 for all parts lots. any thing over $.00 ill pick up the difference..
deanodizing of parts a even $5.00 for 1 part or a lot ....
cooling heads $20.00 for the sheer time it takes to do them ...very time consuming piece. and you cant buy a chrome cooling head for close to that price.
skid plates ' bulk head plates' servo plates ' engine plate $10.00 each they take some time to do each one
bulk head braces $10.00 a full set
engine mounts $10.00
steering knuckles $20.00 a full front set
rear carriers $10.00
steering post with threaded nut $5.00
cross braces $5.00 a set
tvps $20.00 a set very time consuming pieces
you can pm me for details and any questions on parts youd like me to do that i don't have listed ...
heres a few examples of polished parts.
tried to show the reflection in it after polishing the flm tvps
stock savage x tvp,s deanodized and buffed out to a mirror chrome finish
a finished tvp and unfinished tvp
a stock engine mount before polished next to stock mount i polished grey to mirror chrome
stock lrp z.28 cooling head next to a stock lrp z.28 coolong head i de anodized and buffed n polished. came out sick looking .. like a mirror... only a little blue deep in the cooling fins and down by the button,, impossible to reach to buff out. but still looks great imo. and the good thing about this service ...i can do it litterally to any cooling head you like.. unlike trying to find a polished cooling head for your mill that they don't make...
stock hpi engine plate deanodized then buffed to a mirror finish.
stock hpi cooling head deanodized then buffed out ...
lrp z.28 spec 3 deanodized and polished chrome
flm extended hd dog bones. 2 i nickle plated next to the stock black ones.still need to plate the other 2 .. was just showing comparisons..
my spur gear and clutch bell i freshly nickle plated and buffed out. hard to get good pics of this stuff with the glare it all creates..but you get the general idea of the sheen of it all....
a few stock parts deanodized n polished out.
before
after
heres an example of my full work... i know some yall don't do bling.. but theres some of you that do and theres a few closet blingers out there to .. so here ya go...
skid plates before ..
skids after deanodized and buffed chrome..
heres a price list .. i think is a nice deal if you consider the time it takes to do each piece .. I'm basically working for free lol..
shipping ... $4.00 for all parts lots. any thing over $.00 ill pick up the difference..
deanodizing of parts a even $5.00 for 1 part or a lot ....
cooling heads $20.00 for the sheer time it takes to do them ...very time consuming piece. and you cant buy a chrome cooling head for close to that price.
skid plates ' bulk head plates' servo plates ' engine plate $10.00 each they take some time to do each one
bulk head braces $10.00 a full set
engine mounts $10.00
steering knuckles $20.00 a full front set
rear carriers $10.00
steering post with threaded nut $5.00
cross braces $5.00 a set
tvps $20.00 a set very time consuming pieces
you can pm me for details and any questions on parts youd like me to do that i don't have listed ...
heres a few examples of polished parts.
tried to show the reflection in it after polishing the flm tvps
stock savage x tvp,s deanodized and buffed out to a mirror chrome finish
a finished tvp and unfinished tvp
a stock engine mount before polished next to stock mount i polished grey to mirror chrome
stock lrp z.28 cooling head next to a stock lrp z.28 coolong head i de anodized and buffed n polished. came out sick looking .. like a mirror... only a little blue deep in the cooling fins and down by the button,, impossible to reach to buff out. but still looks great imo. and the good thing about this service ...i can do it litterally to any cooling head you like.. unlike trying to find a polished cooling head for your mill that they don't make...
stock hpi engine plate deanodized then buffed to a mirror finish.
stock hpi cooling head deanodized then buffed out ...
lrp z.28 spec 3 deanodized and polished chrome
flm extended hd dog bones. 2 i nickle plated next to the stock black ones.still need to plate the other 2 .. was just showing comparisons..
my spur gear and clutch bell i freshly nickle plated and buffed out. hard to get good pics of this stuff with the glare it all creates..but you get the general idea of the sheen of it all....
a few stock parts deanodized n polished out.
before
after
heres an example of my full work... i know some yall don't do bling.. but theres some of you that do and theres a few closet blingers out there to .. so here ya go...
skid plates before ..
skids after deanodized and buffed chrome..
Last edited by a moderator: