clutch bell sizes

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.

carlg1

Active Member
Messages
71
i have a savage x ss with a k.4.6 mill and standard 17cb and 47 spur, am trying to get a bit more top end, thinking of getting an 18 or 19 cb, does anyone know how much difference each will have , thanks
 
19/47 with a (pro) modded mill will get you about 48 mph. This was the GPS on my ecrm picco 28 on that combo
 
thought it might be more than that as hpi claim it already does 44mph, just seen a modded picco on smf, sounds like a fast engine
 
ya i think 44 mph is a little fast for a stock savage but with the right gearing they are pretty quick!!
 
RPM is RPM . a stock mill can only turn so fast. that 48MPH was with the mill screaming... I have not heard but 3 or 4 mills that have the same or more RPM that mine can get to. stock is 38-40 depending.
 
as of today I'm runnin 19/47 with a stock lrp and it screams but the trans needs adjusted a little now tho but you should see a nice increase in top speed but the accleration suffers a little tho and it can still wheely easily too
 

Latest posts

Members online

Back
Top