Search results

  1. rcaircraftnut

    Parks450's super duper build

    Are those flm tvp your selling the lcg ones? Also how much?
  2. rcaircraftnut

    Running in circles.

    I run a 2700 mah li ion with an ultimate bec so plenty of power. As said above this is the MOST important ingredient in a good steering truck.
  3. rcaircraftnut

    Running in circles.

    Try replacing the bushings in the belcranks with bearings. I run a 300 oz servo. All stock otherwise. Mine turns great.
  4. rcaircraftnut

    Little to no braking power

    We need more info. What brake setup does it have? Steel disc? Pink composite discs? Are you running the stock throttle setup? Pics will usually help. Check simple things first. Battery charged fully. Screws on servo tight. Set screw on brake arm tight. Screws holding brake discs to trans tight.
  5. rcaircraftnut

    New look & feel to the Forum

    Hopefully it will be before HPI goes bye bye lol. I know, bad joke. Lol.
  6. rcaircraftnut

    Performance steering kit

    Get the carriers. Those adjustables are stock replacement but adjustable for camber only.
  7. rcaircraftnut

    frddyj's New Ride

    Yay. Grumpy. Long time no see brother.
  8. rcaircraftnut

    Parks450's super duper build

    Yeah. I was thinking prototype 2018 body.
  9. rcaircraftnut

    Performance steering kit

    Yeah that ball end aint big enough to take the load and thus becomes a wear part. Just go back to the stock type arms. They make adjustable ones. I have a set on my x.
  10. rcaircraftnut

    Parks450's super duper build

    Kinda looks like........ 5SC?
  11. rcaircraftnut

    Dwindling Engine Choices

    Dang man. I would snap that up but I aint workd since b4 xmass. Supposed to back any day now...........
  12. rcaircraftnut

    Performance steering kit

    Cant drill out to 4mm bolts? I just cant picture this not having a fix that wont break the bank.
  13. rcaircraftnut

    Dwindling Engine Choices

    Ive owned many rc engines over the last 30 yrs and have never needed parts support for anything other than crash damage. If you treat the engine rite and it was made rite, it should last a very very long time. Back off on the setting a bit and let the engine live. Unless your racing then hells...
  14. rcaircraftnut

    Mid tank mod on the cheap/The return of Nut!

    This is what I was taking a break from to work on the Savvy. Ran outa glue lol. Got it to the final sanding point this eve. Still need to fiberglass the hull after sanding then paint. But from box to what you see is 4 evenings work.
  15. rcaircraftnut

    Performance steering kit

    Why not drill oit the ovaled out holes and sleeve them back down to the needed size with a brass sleeve? Or drill them out and use good quality us made larger bolts so they stop breaking? Try Mcmaster carr or grainger or Takoma screw for hardware. You buy a box of 100 and have a 10 year suppy.
  16. rcaircraftnut

    Hobbico files for Chapter 11 Bankruptcy

    My main interest for the last 30 yrs has been rc airplanes. I have messed with cars off and on throughout that time. Manufacturers come and go. Just look at how many defunkt kits there are for rc planes. I personally have 6 kits that are out of production. As well as at least 8 built and flying...
  17. rcaircraftnut

    Mid tank mod on the cheap/The return of Nut!

    Thanks man.
  18. rcaircraftnut

    WTB WTB Jumbo kong or Jumbo Swamp tires

    All the wheel hexes are pefect except the one pictured. It still holds fine though as long as you keep the nuts tight like your supposed to.
  19. rcaircraftnut

    Mid tank mod on the cheap/The return of Nut!

    Just took it outside and after a little flooding fiasco it fired rite up. Ran the same as it always did with a full tank. Didnt even need to touch the needles. It did however lose tention on the slipper. For some reasom the nut backed off. Going to replace it and try some locktite. Saved the...
  20. rcaircraftnut

    Mid tank mod on the cheap/The return of Nut!

    If anyone is interested I may be willing to make up a few more of the roll cages as shown in my avi. I am going to make one for this truck after I get the FLM LCG TVP set for it. I unfortunatly sold the prototype but I never did break it. Not for lack of tryin either. Lol.
Back
Top