Search results

  1. Slimshamis

    Flm midtanked savage xl lrp .30 and parts lot

    Well maintained savage xl with 250cc mid tank, flm chassis, Hpi big bore shocks custom throttle/ brake linkage, 3spd transmission, ercm tuned pipe, lrp zr .30 engine with about a gallon on it still has super right pinch this truck wheelies on command also has brand new dynamite max life aluminum...
  2. Slimshamis

    Hyperion EOS0615i DUO 3 and prolux power supply

    I have a hyperion EOS0615i DUO3 and a prolux adjustable 12-15v 30 amp powersupply I bought no more than 3 months ago this this is well taken care of have all cables and manuals and boxed for both the charger and the ps only thing that is missing is one of the hyperion balance boards, my dog got...
  3. Slimshamis

    Anyone know what car this is? And what SH MOTOR this is?

    Anyone know what kind of buggy this is? Also I know it's an SH motor but don't know what one I need factory needle specs?
  4. Slimshamis

    WTB servos WTB

    looking for a hitec 645mg for steering and a fast digital throttle servo for throttle/brake don't have to be new looking for a good deal
  5. Slimshamis

    WTB WTB 250cc mid tank kit, XL roll cage

    looking for a 250cc mid tank kit maybe prc lemme know what you got also looking for savage xl roll cage
  6. Slimshamis

    Fs hyperion lipos and turnigy nano tech

    For sales, purchases, descriptions, or for any other matter related to this specific forum, the Owner and / or Staff of HPISF does not warrant or assume any legal or monetary liability or responsibility related to the accuracy, completeness, usefulness, or condition of any information...
  7. Slimshamis

    Any one by me?

    I'm in merrillville Indiana any one by me?
  8. Slimshamis

    LiPo problems

    Hey guys my lipos are running really warm my motor temps towards the end of the run are between 150 and 165 depending on how warm it is outside running 5s Hyperion 5000mah 45-90c stock gearing 20 44 any help should I back the pinion down to 18 the truck is a little heavier than stock it's a flm xl
  9. Slimshamis

    Scooter batteries

    Hey guys I got a question that is not related to savage I just got my daughter a electric scooter and I don't want get to have to wait 12hrs in between chargers so I was going to solder up a charge lead to use my Hyperion eos615i to charge it but I don't know what settings to use? Any help Is...
  10. Slimshamis

    Aluminum BB's or 112mm D8T shocks

    Ok guys I'm really fed up with the big bores and the stock towers are bending forward and breaking shock ends, I put my flm towers on and break a bulk, so now I'm looking at prc lcg towers with the D8T shocks. I'm a pure basher looking for input.
  11. Slimshamis

    WTB Wanted Extended flux motor plate aluminum or steel

    Lookin for a extended flux motor plate I currently have a prc carbon fiber but want a steel or aluminum extended plate Thanks all Shane
  12. Slimshamis

    LiPo for RX

    Hey guys I'm looking to use a LiPo for my RX pack, now if I bought a CC BEC and just put a connector on the end of it so the battery an plug in and set the voltage output to 6v, would the BEC also act as a cutoff and if so when the voltage gets so low would it trip the failsafe on the receiver...
  13. Slimshamis

    WTB Heavy duty axles

    Need heavy duty axles for a savage x
  14. Slimshamis

    WTB Lid for xl or xl brushless

    I'm looking to buy a lid that is in ok shape but don't want to spend a whole lot, if anyone has a cheap lid they don't use let me know. Thanks guys
  15. Slimshamis

    WTB Need a part

    Hey guys I need a 9t bullet proof bevel gear everytime I take this thing out I break something
  16. Slimshamis

    New lid I painted

    New mOnster energy lid I did for my Losi 8ight brushless This is the second body I've ever painted :-) I think it turned out pretty good
  17. Slimshamis

    Power cuts out when u roll into full throttle

    Hey guys I'm getting super frustrated with this thing an I need some help. I have a xl flux running MM esc with the torq 2200kv motor, with 2 3s turnigy 45c50c burst lipos. I originally thought my LVC was to high at 3.4 so I put it at 3.2 per cell. Here is the problem on fully charged lipos I...
  18. Slimshamis

    Ercm pipe

    I have an xl with the 5.9 I hear the ercm pipe is the way to go will it work with the stock manifold I would like to get one where can I pick one up at couldn't find anything on ebay
  19. Slimshamis

    Need input

    Hey guys Ive been playin with my new xl a few things I've done so far is a hitec 7955tg for steering servo I did the cutting of the hubs and carriers for better steering, sway bar kit front and rear, and the hpi roll cage, and I hav to order the heavy duty servo saver spring I got it almost all...
  20. Slimshamis

    Need a Lil help

    Just got my brand new xl in today I started breaking her in doing the idle method it was idling great, I've been reading all these break in threads and people having a hard time to get the temp up mine was hitting 250 degrees how do I get that tto come down during break in, this truck is brand...
Back
Top