Search results

  1. Ducman82

    Thinking Blitz boys! help me out here

    so when i made my XL nitro it warped in to a tray forward Flux of death.. To big, and to much for me so I'm selling it. i want a smaller blitz for around the block etc. whats the best way to start from scratch? id hate to buy a complete kit, then not use half of it... (that what i did with...
  2. Ducman82

    Big bore leak issue

    i replaced the oring on my big bore (just one shock) and after i run truck, even just down the street, no jumps it will leak when it sits.... gurrr. anyone else have that problem.?
  3. Ducman82

    Mamba Monster ESC fan question

    so the fan on my ESC does not want to come on anymore, so i checked it and the bearing is very, VERY choppy. so i think the fan motor is bad. anyone ever replace one on a mamaba?
  4. Ducman82

    small alum cage

    here are some pics of the alum cage i made. not the straightest thing in the world, but it will do the job. i used some scap aluminum from my TIG class. https://www.hpisavageforum.com/forums/showthread.php?t=12684&page=14
  5. Ducman82

    Diff bearing and cup issues

    So, looking at my diff cups, it looks like the end is getting ground or smushed out so the bearing will not slip off. WTF???? i have no idea how that is happening. is it a shim issue? I'm guessing the cup is smacking in to it....
  6. Ducman82

    Full throttle when out of range?

    i don't want to test this..... but i know if the radio runs out of juice or is turned off, the truck goes in to full throttle mode. that being said, if it looses radio signal (goes to far out) will it go balls to the wall? is there a setting in the Castle software to stop that? i have a Mac...
  7. Ducman82

    good pavement tires

    Now that my brushless build is done (minus tweekin) and drives like a dream, i need a good set of road tires. not off road. just pavement. any recomendations? since i have XL arms whats a good offset if any?
  8. Ducman82

    Ring gear position

    so when i get the bulks back together i don't want this thing to go backwards when i want forward... or to try and bend it self in half cuz the wheels are going op directions... is this right?
  9. Ducman82

    HD Diff cups???

    So when i first got my FLM bulks, the XL diff cups could not fit. so i had to have them turned dow. so here is my question, should i stick with the turned down cups, or should i get the FLM cups ? and anyone know where i can get them. FLM was no help "check the net" was all i could get...
  10. Ducman82

    Duc's quacky brushless build

    so i am now starting my BL build. i got a flux trans and gears one the way from ebay, and the truck is all apart on my work bench. id like to get the new HD diff gears that just came out... but I'm having a hard time finding them. i hope to get them befor i build it, but the HD sets i have now...
  11. Ducman82

    Diff oil weights??

    so why do some people add diffrent oil weights to there front and read diffs?
  12. Ducman82

    LiPo ideas needed

    so i am in the process of building my brushless conversion, and was wondering what everyone used for lipos? i take it the 3s, and 6s etc, mean the number of "cells"? I'm leaning towards SMC... toughts? duc
  13. Ducman82

    Fastlane machine brushless kit question

    anyone know if the FLM brushless mount would take a FLUX HP or castle mamba 2200 motor?
  14. Ducman82

    Duc's futur brushless conversion

    so whilst I'm playing with my nitro, i think ill start a brushless conversion as well. being that i have to much time on my hands so. I'm getting the mamba 2200 kit flux batt boxes (ill make them work on my FLM tvps) i hear the flux uses a one speed trans. so I'm guessing i will need that...
  15. Ducman82

    mid tank flood issue

    any of you fine poeple that have a mid tank mod having flooding issues? i think mine is after it sits. i know the tank is a little above the carb, but my fuel filter and line is up nice and high. thoughts? Quack
  16. Ducman82

    Here she is... with a drum cage!

    here is princess, thanks for the cage drum. good work my friend. http://s575.photobucket.com/albums/ss197/Ducman82/?action=view&current=003-4.jpg http://s575.photobucket.com/albums/ss197/Ducman82/?action=view&current=004-3.jpg...
  17. Ducman82

    not sure what is going on. need some help

    so i finaly got my savy together (first ever nitro RC) and i had Robin at Extream make me a stage two Picco .28. it will some what idle but dies the second you open the throttle. when it does run fuel comes out the exhaust.. so I'm thinking rich. being my first tune i set the mill to its...
  18. Ducman82

    RPM sensor mount

    so here i added the Spektrum RPM sensor to my Picco. i had to grind away and cut the end off the larger of the two mounting brackets that came with the kit. it seams to me that the HPI flywheel could be a little bigger so the sensor has a better angle on the "dot" or "line" that you add. i used...
  19. Ducman82

    Picco mount issue?

    ok so i just installed my 16tooth CB on my picco, mounted it to the FLM engine mount and went to install it in my truck. wow. talk about a tight fit. its all thew way to the right (looking from back to front) and is not getting any closer to the spur. I'm positive i have a mess that is to...
  20. Ducman82

    clutch spring issue

    so I'm installing my first clutch. i have mugen springs and they will not go in the grove on the fly wheel nut. they ride above the grove. even with stock shoes and springs too.... http://s575.photobucket.com/albums/ss197/Ducman82/?action=view&current=001-6.jpg
Back
Top