Search results

  1. Jt

    GST Diffs for Site Jester

    LOL..... Site Jester sold em to Joe and I made a deal with Joe so now I have them back...Anyhow they look great and still run smoth; I have put some use on them since I got them back. SAVAGESHAUN~ I can do them but I am having some personal issues that are keeping me away from the computer...
  2. Jt

    Savage Gear Chart With Ratios

    https://www.hpisavageforum.com/forums/showthread.php?t=2005&highlight=manuals Its already a sticky at the bottom of this page
  3. Jt

    hpi savage parts interchangeable

    The X style towers can be modded to fit on the old style bulkheads. I have done it on one of my trucks because the newer towers seem a bit stronger and don't flex as much when using the LST shock mount kit.
  4. Jt

    Dumb q's about gearing

    Higher CB teeth count and lower spur teeth count for speed..with what you listed you have... 17/47 would be the fastest combo you have in your hands.
  5. Jt

    wheelie bar

    Looks good Joe, I like it... What does the upper part mount to?
  6. Jt

    Savage identification help.

    Thanks 4x4, I had forgotten about the first Savage SS .25, it did come with a ribbed pipe, sorry for my misinformation in my eariler post.
  7. Jt

    Savage identification help.

    After seeing the pics that is a hotbodies truckzilla chassis (TVP) which means it is extended 1" over stock, also that is a HPI ribbed pipe that was not a standard part on any savage, the radio box is old style and you got a good deal for 100 bucks.
  8. Jt

    Savage identification help.

    rear pick up tank is the normal one now, the first savage with the primer had a pick up in the front of the tank I do believe. Most likly could have started out being a savage .25, savage ltd, or a sagage 4.6 or SS model if the steering or diffs haven't been touched it??(big if) that would...
  9. Jt

    Savage identification help.

    The Savage could have started out as a Savage .21 and had the tank, tranny, and upper arms replaced. All savages pre X were on the same chassis little things changed along the way (such as fuel tank, brake hub, steering assembly, diff gears). So trying to determine what model it...
  10. Jt

    anodized metal removal

    Mothers Polish gives a mirror finish.
  11. Jt

    Look Ma...no Pressure Line

    If I followed what you described, does it look like this? Plugged psi port on pipe Filtered tank inlet I have heard of this being used before, I have broken a pipe in the field before and wasnt able to attach a psi line to the pipe, I kept running with out pressure to the tank...
  12. Jt

    Mid tank question

    For the front mount, I used an engine brace to supports the steering posts and the tank. The rear is supported by a cut down modified old style savage upper a arm.
  13. Jt

    what nitro fuel do you recommend?

    I am using Byrons 30%, been using it for a few years with very good luck and performance.
  14. Jt

    Mid tank question

    It is a great mod and is night and day in difference on the steering. It is done to all of mine slightly different than FX but the same idea.
  15. Jt

    heat cycle break-in!

    Mark your flywheel after you first install it so you have a line to go by for BDC
  16. Jt

    GST Diffs for Site Jester

    Well I can quote myself from earlier in the thread, maybe this will answer your question
  17. Jt

    GST Diffs for Site Jester

    Sorry for the delay in response (had some issues to resolve) anyway to answer your questions. I use a custom shim (1 piece instead of a bunch off little ones) to get the mesh correct, I think I used a 3mm drill dit for the drive cups, and for the oil that comes down to driver preference...I...
  18. Jt

    Mid tank question

    Using a bigger tank isnt a problem... there isnt much choice out there for tanks above 160cc with a flip top lid. I will give you some links to the ones I have used click me -->CEN 220cc click me -->Aqua Craft 180cc click me -->Aqua Craft 180cc Tottz's truck click me -->Ofna...
  19. Jt

    Mid tank question

    Mid tank can be done on any chassis, just the way things mount will be slightly different. What style are you looking to do?
  20. Jt

    inline throttle servo w/ innovative r/c tvps?

    I use RPM, Traxxas, Kyosho servo mounts or you can even make your own. I used RPM for that particular build.
Back
Top