Search results

  1. dgetson

    FLM Mid Tank - getsonrc

    Not much left to do but here is an update. Got the fuel tubing all setup now. Put a fuel filter on the side of the tank like GRKSTL. It looked very neat so I decided to use it. Thanks GRKSTL. Put a loop in the fuel line as well.
  2. dgetson

    FLM Mid Tank - getsonrc

    Update on what the savage looks like now. Finished the receiver box. Finished the throttle and brake linkages. Let me know if there is anything I can do to improve the throttle linkage. I left a space inbetween the slider and the screw on end for the brake part. Not sure if that is ok or what...
  3. dgetson

    FLM Mid Tank - getsonrc

    @ditchdigger get the servo horn or the turnbuckle from the baja 5b?
  4. dgetson

    FLM Mid Tank - getsonrc

    Just wondering if this (http://www.greathobbies.com/productinfo/?prod_id=GHH1176) would be a good servo horn for the steering servo? Thanks
  5. dgetson

    FLM Mid Tank - getsonrc

    Would this (http://www.amainhobbies.com/product_info.php/cPath/1_25_1466_74/products_id/25829/n/Traxxas-Revo-Steering-Linkage) work?
  6. dgetson

    FLM Mid Tank - getsonrc

    Do you have a link for a longer link?
  7. dgetson

    FLM Mid Tank - getsonrc

    Had this servo horn (http://www.amainhobbies.com/product_info.php/cPath/61_101/products_id/5356/n/Hitec-Machined-Aluminum-Single-Sided-Servo-Horn-Blue) that came with the hitech servo. Seems to work now. The screw holding the steering arm to the servo horn is small but I think it is going to work.
  8. dgetson

    FLM Mid Tank - getsonrc

    What kind of servo horn should I use for the steering servo? The stock ones don't allow for the full range of the steering.
  9. dgetson

    FLM Mid Tank - getsonrc

    Got some pics of the build progress. Transmission Installed Front and Back End Installed Motor Mount Installed D8 Tank and Servo Anyone have any ideas on what to do with the steering servo? I have it installed but I wouldn't mind putting the receiver by the tank and...
  10. dgetson

    FLM Mid Tank - getsonrc

    Bought my Savage a couple years ago now (2008). Ever since I bought my Savage I have been on this forum. Lots of helpful people here and great advice. I have always got quick responses on all my questions. So I finally decided to spend the money to buy the parts to create a FLM MidTank...
  11. dgetson

    Badland Tires on Maximizer Rims

    I had asked about putting holes in the badlands too... I was told that you don't have to put holes in the tires. you can just leave them as they are.
  12. dgetson

    Badland Tires on Maximizer Rims

    I was afraid of stripping the holes in the beadlock, but I tightened all the screws up and now everything is flush. Thanks
  13. dgetson

    Badland Tires on Maximizer Rims

    To clarify I used the rings that were included with the maximizer rims when I installed the Badland tires on the maximizer rims.
  14. dgetson

    Badland Tires on Maximizer Rims

    Yes i used the rings that were included with the badlands.
  15. dgetson

    Badland Tires on Maximizer Rims

    So I installed some Badlands on some Maximizer rims, but there is a little space between the faceplate and the tube. I was just wondering if this is normal. I was also wondering if you are suppose to put holes in the tires since the Maximizer beadlocks don't have holes in them. Thanks
  16. dgetson

    Savage Bashing Compilation

    Me bashing my savage... http://www.youtube.com/watch?v=U4X2g2ZA3Yk
  17. dgetson

    Engine Reving High

    Ya it was the rear grub screw that was missing. wanted to drive the truck today so i just took the front on and used it in the rear. The truck needed a good bashing today.
  18. dgetson

    Engine Reving High

    Ya i changed the low speed needle and it seems to rev normal now. It also sounds way better. Now i have a problem with the transmission spinning the rear drive shaft. I have to take that apart now and see whats wrong with it. Since its not spinning the rear differential or rear driveshaft at all...
  19. dgetson

    Engine Reving High

    Whats a good thread on how to check for air leaks?
  20. dgetson

    Engine Reving High

    The temp outside was about 50-60 degrees fahrenheit. So like 12 degrees celsius.
Back
Top