Search results

  1. Cummins Driver

    Cheap but good radio

    I just bought one of these myself. I have been running 2 of the 2 channel Flysky's for a while now with no issues at all out of it. I already have 3 recievers, and so now Ill have 4 receivers. I think the thing I will enjoy the most will be the model memory. Never had a radio with that feature...
  2. Cummins Driver

    Free Brake Mod

    Id say the ofna mod is better. For getting by on the cheap though, the free mod will greatly improve braking.
  3. Cummins Driver

    Free Brake Mod

    I did this also and it doubled how well my truck brakes. I didnt realize that the spring tension sucked that much juice out of the servo. Its well worth doing as long as your throttle return spring works fine and you don't get too hasty cutting.
  4. Cummins Driver

    Diffs swap?????

    4.20 is actually a lower gear ratio than 3.30. In other words, the top speed would be noticeably slower, while the acceleration would be quicker.
  5. Cummins Driver

    wats your other addiction (hobby)

    Working on pulling, and drag racing my real truck, a 94 dodge diesel. I love diesel truck pulls. And also riding 4 wheelers. Just went today with some buddies for the 1st time this year and it was a blast! Eric
  6. Cummins Driver

    God is busy

    I love this one: http://www.youtube.com/watch?v=m989v49WNsw God is real and he doesent have to prove it to anyone, but you better hope you arent the one to call him out when he decides to make an example! If i had a professor like the one in the video link, I would have stood up...
  7. Cummins Driver

    Video of my new Axial .28 spec 1s

    http://www.youtube.com/watch?v=VQP4R61R8oQ Got a chance to run the axial some more today and get some video. What do you guys think? I'm pretty happy with it so far. Doesent even have 1/2 gallon through it yet. First start in the video was from dead cold, sitting all night. It was 56*...
  8. Cummins Driver

    Got my Axial .28 Spec 1s today!

    Thanks guys! I have video uploading to youtube right now, so be on the look out for a thread with video:beer:
  9. Cummins Driver

    Axial .28 Spec 1s questions

    Axial says 4 tanks. I ran 5, surely that is enough. It may continue to loosen up, and I'm still running a hair rich, but the initial break in is done.
  10. Cummins Driver

    Axial .28 Spec 1s questions

    Well, i got the break in finished on it today, and ran several tanks through it! I love it so far. It idles good, starts pretty easy, and has about the right amount of power for what I'm doing. One thing is for sure.... I cant keep the front end down! haha I have flipped it on its back...
  11. Cummins Driver

    1st race ever. Things you should know

    I see. I have watched them race indoor at the LHS just a couple times and saw them, just wasnt sure what they were for.
  12. Cummins Driver

    What clutch setup does everyone run?

    Well, my stock clutch is needing to be replaced. I want to go aluminum i think. What is everyone running? And what springs? Thanks Eric
  13. Cummins Driver

    Truck idle out of whack

    Hopefully that fixed it for ya. Let us know if it worked. Now, If you adjust the idle screw and it doesent idle down, you should be able to use the trim to put more preload on the carb linkage to keep it closed. Let us know how it goes, but that should have you fixed up!
  14. Cummins Driver

    Truck idle out of whack

    Your throttle linkage is simply out of adjustment. CENTER your throttle/brake trim on your controller. Then take your throttle/brake servo horn off, and watch the throttle slide in the carb. Turn the servo horn by hand until it shuts the slide all the way, and then push the servo horn back onto...
  15. Cummins Driver

    TT Pro .28 settings

    make sure the air filter is clean and the elements are installed correctly. I know it sounds dumb, but my cousins .25 savage had been running fine, then all of a sudden had no power. If i leaned it and picked it up we could get it to accelerate decent, but then it would have real bad lean run on...
  16. Cummins Driver

    Got my Axial .28 Spec 1s today!

    Yeah, the sealer set up for probably 8 hours. I sealed it and left about 2:00 and started on it again a little after 10:00. I should be able to finish break in tonight, and maybe get some power out of it.
  17. Cummins Driver

    Got my Axial .28 Spec 1s today!

    Hey guys. I got my very anticipated Axial .28 Spec 1s gray head motor in the mail today. I traded for it used, but it only had 2 tanks through it, and still needed break in finished. I didnt think id get to run it today, as i had to go to my girlfriends and go somewhere with her. It killed me...
  18. Cummins Driver

    Axial .28 Spec 1s questions

    Thanks, I should have the engine today!
  19. Cummins Driver

    Axial .28 Spec 1s questions

    Ill keep you guys updated for sure. Should have video soon after i get it broken in.
  20. Cummins Driver

    1st race ever. Things you should know

    What does the transponder do? The guy at the LHS is thinking about building an outdoor track and running nitros. Id love to try it out if he does. Right now they only race electrics on an indoor oval, but id like to try an outdoor track just for the fun of it. I have never raced...
Back
Top