Search results

  1. H

    Twitching and bad steering.

    Hey guy's! I played with my Savage Flux today and noticed my steering is off. Sometimes it will just veer off right without touching the control. It twitch's sometimes to. I have to adjust my steering rate just to make it turn full right, and left. Is my servo shot?
  2. H

    big bore shocks have lost strength

    Hi, I keep my savage flux off it's wheels all the time. I noticed when I put the truck down on it's wheels the truck sits lower and isn't as high. The shocks have lost it's strength for some reason. I added the plastic shims between the spring and mount so it sits higher. My garage is warmer now...
  3. H

    engine not running properly.

    Hi there. I have a Savage x 4.6 RTR with a 3speed that is not running properly. On a full tank it will bog off the line with no power and will barley hit 3rd gear. It's like it's to rich even with the HSN and LSN adjusted properly. I've also noticed it's doing the half tank lean thing and runnig...
  4. H

    problem with Savage!

    Hi everyone! I have a problem with my Savage X 4.6 RTR. Let's start off with on a full tank of fuel it starts up fine and idles fine but when u try to drive it at half or full throttle it bogs like crazy with very little power taking a while to reach top speed. It goes through 1/3 of a tank very...
  5. H

    cup joint problem!

    Hi everyone! I have a stock Savage x 4.6 rtr with a rear cup joint problem part number (86083). When i push the truck manually with everything off the rear drive shaft clicks like it's getting hung up on the cup joint. I tried replacing the cup joint twice with new ones but the drive shaft will...
  6. H

    2 speed transmission problem?

    Hi everyone. I have a problem with my stock savage x rtr 4.6 transmission. I sripped the spur gear in the middle and started to inspect why it happened,so I took the top off the tranny and noticed that one of the lower gears closest to the brake disc is wobbling when i spinned it. why would...
  7. H

    49 tooth spur gear?

    Hi everyone. I got a question about a 49 tooth spur gear. I have a stock Savage x RTR 4.6 and was wondering wich part number is it for the single slipper clutch 49 tooth spur gear. I think that's what i need? I see 2 49 tooth spur gears with the same part number 77094. Thanks.
  8. H

    Help!glow plug has little black marks on the bottom.

    Hi everyone. My Savage x RTR 4.6 just went through a glow plug today and when i pulled it out it had black marks on the bottom. Is this new fuel i'm using or something else? The new fuel has 11% oil content and 30 % nitro and is called XP fuel extreme performance. Thanks.
  9. H

    installing a stock clutch.

    Hi there everyone.I was just wondering if u guy's have steps or pictures installing a stock clutch on a F4.6 rtr Savage X.Thanks.
  10. H

    Help! no fuel getting to 4.6

    Hi everyone! I just recently took the back plate off and the carb off to seal the engine on my Savage X 4.6 rtr. I put it all back together and now when i prime it there's no fuel getting to the carb.Did i miss something?Can anyone help.Thanks.
  11. H

    LRP motor

    Hi there everyone. I'm looking for a new motor for my Savage X 4.6 RTR. I looked through all your guys threads and decided on the LRP Z.28r spec 3. I found one on ebay for $175 dollars is this a good price? I also found that the LRP z.28r p/s savage/sc8/mgt is diffrent looking then the LRP...
  12. H

    Engine overheating.

    Hi there everyone.I posted athread about this before and i'd thought i'd give it another try.I got a lot of good answers from you guys and i thank u.I have a 4.6 rtr that is overheating past 275f.I know you guys say don't tune to the temp gun but if your engines overheating then theres a...
  13. H

    Engine performance and over heating prob

    Hi there i thought i'd start a a thread in this forum.I'm having a major overheating and throttle respnce problem.This thing just keeps rising in temperature like 270F plus.I'm running a cool plug and i changed the header gasket like somebody said to do.Even at idile it runs at 230F.I tried to...
  14. H

    One way bearing.

    Hi there.After i first bought the car the one way bearing started to not grab and just spin when cranking it over.I tried to take it out and clean it and then put it back in. It didn't work so i bought a new one and it's already starting to spinn.Should i put a pull start in it or what?
  15. H

    spur gear issue.

    First i was wondering if the big plastic gear is the spur gear?Anyways the big plastic gear is missing 2 teeth.I just wanna know why it's happening before i go out and buy another one.I see the pinion gear has a small grove working into the metal as well.The 2 don't line up properly.I can't move...
  16. H

    under powered and over heating issue.

    Hello there.I'm having a major over heating issue.I know how to tune the engine properly .I first started with turning the HSN 1/8 but it boggs off the line and is not that fast.Then i raced it around for about 20 minutes and the temp was around 255F or more.Then i backed it off a 1/8 to richen...
  17. H

    tuning

    hello i'm having a problem tuning my 4.6.Ihave problems tuning it.
  18. H

    Engine tuning

    Hi there everyone.I'm having a problem with tuning my 4.6 engine.I'm trying to get the wheelies on command thing going.I turned the hsn about a full turn a 1/8 at a time from flush and the lsn almost all the way in.If i adjust the lsn about a full turn from flush it still bogs off the line with...
Back
Top