Search results

  1. A

    Brakes and exhaust question on 4.6

    I did sand them down I will double check the linkage it was working good then like crap I will post some pics of it later
  2. A

    Brakes and exhaust question on 4.6

    I rebuilt this old 4.6 and need some help I cleaned up the old brakes and reinstalled them they worked ok but after a good hard run they work like crap what’s the best options they are stock 4.6 dual discs also I installed a brand new exhaust pipe new from a 4.6 the black plastic the coupler...
  3. A

    E savage esc problem

    Update I disconnected one motor and it’s working.I then switched and tried the other motor and it ran normal hooked them both up and it ran normal so I am very stumped unless all my batteries are starting to go once I had it running it ran the batteries down quick
  4. A

    E savage esc problem

    Ok got the adaptors to try a different set and combo of batteries and it worked I ran the truck about 10 min and it was fine I recharged the batteries to run it again and it’s back to the same problem will try and see if I can get this video up here is the link to the video
  5. A

    E savage esc problem

    Tried it and still the same going to try another set of batteries I just ordered the adaptors so some time next week thanks for the help so far
  6. A

    E savage esc problem

    Does the manual state that order because I couldn’t find anything
  7. A

    E savage esc problem

    If the esc is broken I am going to go brushless something mild since the factory esc cost a lot more then I paid for it
  8. A

    E savage esc problem

    I also have the Manual but All it pretty much states is how to check the esc am i missing something it does say set up but I can’t find it in the manual
  9. A

    E savage esc problem

    That’s the problem I can’t figure out how
  10. A

    E savage esc problem

    I picked up an e savage for a good deal it came with the hpi batteries that surprisingly still take a good charge the problem I am having is when you pull the throttle it won’t go but if you pull the trigger very very lightly reward like a mil meter back it will start to work then you can pull...
  11. A

    Roto start part ?

    The link is great but shipping is an additional 20 I just need the shaft
  12. A

    Roto start part ?

    I need the dog bone style and I All I need is the shaft
  13. A

    Roto start part ?

    I ordered a complete Roto start with shaft from a chop shop for a decent price the problem I am having is he shaft is the newer one and I have 2 engines with the older shaft style and I can’t find a shaft not even on eBay any suggestion would be great ?
  14. A

    Savage x spur question

    I am replacing my spur and looking at the Manuel and it’s confusing first my new plastic spur looks like it needs a bushing or bearing the old one is very stuck in the old spur but the manual doesn’t show it then I watched an hpi video and it shows a black plastic washer and I don’t see that in...
  15. A

    Savage x resto project ?

    Does anyone know if the hellfire diffs where the same size they have gaskets for a hellfire that are the same as factory thickness on eBay and there in the us
  16. A

    Savage x resto project ?

    Will any of the gaskets on eBay Work there are so many different ones
  17. A

    Savage x resto project ?

    Ok so I opened them up and to my surprise there was no gasket so someone at one point opened these and didn’t use a gasket now I also found was the spider gear set in these but the manual only shows the 2 gears not 4 am I missing something hear any info would be great thanks
  18. A

    Savage x resto project ?

    Yes they are the plastic ones can I use the alloy cups from my bad x diffs ?
  19. A

    Savage x resto project ?

    Another question I have is before I put these diffs in service I would like to brake them down and clean them did the 21 25 diffs use grease or diff oil from the factory and where can I buy just the gaskets without the cups ?
Back
Top