Search results

  1. maximusraylius

    mickeys next savage

    Nice looking truck so far.
  2. maximusraylius

    Tell me what u think?

    Go for it. I'm going to run 2 of them in my truck puller. I run the lrp z28 in my other savages and love them.
  3. maximusraylius

    Showing off some new lids

    Your welcome ed. Glad you like them looking good on your truck.
  4. maximusraylius

    Problem idling

    Have you checked the remote to see if it needs adjusted? Sometimes it happens with out noticing it.. so Ppl start tuning the motor...if it's not that ..then might be the tube.. the lsn when leaned out brings up the idle so might need to turn it out slightly.. shoulda adjust the high speed needle...
  5. maximusraylius

    Integy rear carrier questions

    Sounds like the big Joe are off balance.. mine do that when on and stand and I rev it for a second
  6. maximusraylius

    Integy rear carrier questions

    Like the cup itself goes in and out of the bearings? Use a small piece of fuel tubing or a small of ring in the cup to take up the slack and hold the cups from having movement ..
  7. maximusraylius

    Glow plug again.

    No that's a cold plug the stock ones are medium I believe...the cold plugs are for higher nitro content fuels like 30% look for awhile medium plug and you'll be good . Or hot. What fuel you running? Hot to medium plugs for 20% fuel. Cold for 30% fuel
  8. maximusraylius

    Integy rear carrier questions

    Where's the actual wobble coming from? I use the integy carriers on all my trucks with no wobble at all they fit the arms and axles perfect.. they shoulda have White plastic spacer on each side of the carrier on the bottom hinge pin ...and I wouldn't grease anything the bearings are sealed.
  9. maximusraylius

    2011 Savage X 4.6

    Cover plates? The one way bearing is fairly common to go out on new motors from the compression and rough starts it jars the bearing and can split the bearing housing making it not grip enough to start a tight motor.. the exhaust gasket? How that fail? It missing the header spring? Or is it...
  10. maximusraylius

    2011 Savage X 4.6

    Welcome to the forum... That's alot of breakage.. not un common but kinda out of the ordinary for it to happen that fast. Have any pictures?
  11. maximusraylius

    Grinding sounds and I have a vid question

    Welcome to the forum.. looks like you been taken care of already.. but I'll add make sure you use blue lock tight on the new grub screw when you put it in ..
  12. maximusraylius

    New Savage XL

    your welcome... glad to help...
  13. maximusraylius

    New Savage XL

    welcome to the forum .... loosen up the glow plug then start it after it starts tighten the plug back up .... its got alot of pinch when new... and when it gets flooded it wont turn over to easy .... also turn the fly wheel so that the piston is at the bottom .. so the starter can slam it up ....
  14. maximusraylius

    Savage X Stalling

    yeah sometimes they barely need turned ..
  15. maximusraylius

    Savage X Stalling

    ritchen up the hsn a tad it should be fune after that ... sounds like its running slightly lean once full throttle and it has cleard the fuel out then it stalls it out... try this first then go from there if it don't take care of it we can get you set with next step...
  16. maximusraylius

    Whats your settings like?

    this thread is as forign to me as the pigmies down in affrica lol but it should be a great thread to help other members out that do electric and are new to it ll... good stuff guys ..
  17. maximusraylius

    short video bashing out in the desert .

    heres a fast short video clip ..thought id share to hot to be out in it to long .
  18. maximusraylius

    HAPPY BIRTHDAY ]-[0pa[0ng

    glad you had a good day ...
  19. maximusraylius

    HAPPY BIRTHDAY ]-[0pa[0ng

    happy birthday brian....
  20. maximusraylius

    post your fleet big or small

    lets see these fleets guys .. i know yall have some awesome rcs your proud to show off :)
Back
Top