Search results

  1. apache18

    Gear Meshing

    I'm sorry. I don't know what to tell you. I'm hoping soneone else will chime in and give there thoughts on this matter. Has me puzzled are now. Joe
  2. apache18

    Gear Meshing

    The part that you put the bolts through on the motor,to mount it on motor mount.
  3. apache18

    Gear Meshing

    Thanks for chiming in SJ. Joe
  4. apache18

    Gear Meshing

    integy and i think you could get one from one of the site sposors on here. Joe sorry. I posted twice.
  5. apache18

    Gear Meshing

    I use the stock one myself. A lot of company makes them. Integy, I think gpm are a couple. Joe
  6. apache18

    Gear Meshing

    Theres your problem. Bent motor mount. You may be able to sand it a little if it's not to bad.
  7. apache18

    Gear Meshing

    If you have the motor out. I would check to see if the motor mount is flat on the bottom? Just sit it on a flat surface and make sure it don't wobble around.
  8. apache18

    Gear Meshing

    You may want to check the motor plate and see if it has a crack in it.
  9. apache18

    Gear Meshing

    try to leave the mesh a little loose and then tighten up the mounting bolts. But, whatever you do, Don't leave them loose. Joe
  10. apache18

    venturi

    Well, I took the truck to a guy at the lhs and within 5 mins after I started it up. It was fixed. He played with the carb screws( all 3 of them) and that did it. I would think that after getting it back from thier (axial) main office, the carb screws would be pretty close. And they even...
  11. apache18

    venturi

    motor Thanks SJ. I am going to put the motor back in and give it a try in the morning. Joe
  12. apache18

    venturi

    I am running a axial 32 and it makes a weird(like a humming noise) noise after a few minutes of warming it up. It also will bring the idle up some, when it does it. Can't seem to figure it out. I also just got the motor back from axial today. They installed a new carb on it and said all looked...
  13. apache18

    venturi

    I got an axial 32 and would like to know what the extra venturi's are for. Like how do I know which one to install. Cause it has like 3 of them with the motor. Do I even need to put one in? Thanks Joe
  14. apache18

    Homemade tool

    wrenchin Sweet. No more lining them up on a vice anymore. Thanks Joe
  15. apache18

    American CNC 23mm Adapters

    Those are sweet. I got me 2 sets of them. Can't beat that price with a big stick. Joe
  16. apache18

    gadgits

    I think this is going to be a really good forum. I like it already. Thanks guys. Joe
  17. apache18

    What Do You Look Like !!!!!

    pict No Indian. I had a 18' Apache Jet boat. So, I have always went by apache 18. 18 cause it was a 18 foot hull. Joe
  18. apache18

    High Altitude adjustment

    tuning I had my trucks at 9500' and I could not get them to run worth beans up there. Hope you have better luck at the 5000' mark. I have decided to get an elect. truck for my next trip. Have a good one. Joe
  19. apache18

    checking for air leaks

    Thanks for the reply. That is what I was looking for. Thanks again.Joe
  20. apache18

    checking for air leaks

    Thanks for the help. Joe
Back
Top