Search results

  1. GIRLYPANTS

    steering problem

    wait when you want to know the difference between digital and non digital servo :)
  2. GIRLYPANTS

    steering problem

    tho i will advise that spending that little bit more on a quality steering servo will pay off in the long run, adds better performance to the cornering of the truck too
  3. GIRLYPANTS

    steering problem

    http://stores.ebay.co.uk/IANS-RC-SPARES/HPI-SAVAGE-X-/_i.html?_fsub=4754599 thats a mate of mine i go to, he does deals ;) this guys good too http://stores.ebay.co.uk/ModelforceUK/HPI-Savage-4-6-Spares-/_i.html?_fsub=3552064017&_sid=82098787&_trksid=p4634.c0.m322
  4. GIRLYPANTS

    steering problem

    my bad, i naturally assumed you were from the us :) yea go on ebay, i know a good bloke on ebay that gets parts cheap ill send you link, worth a look
  5. GIRLYPANTS

    steering problem

    http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXUZ89 hitec are good i was given a SF-50 so I'm running that, it works great for me http://www.hpiracing.com/en/part/102777 someone will post a few more decent steering servos to choose from but them 2 is what ive used edited ... to get full...
  6. GIRLYPANTS

    steering problem

    might get hated for this ..... the stock steering servo that comes with the savage is total rubbish, too weak, cant pull the skin off a rice pudding edit ..... hpi know this too, if the truck is very new then id call them up and get them to change it to something like sf-50 servo
  7. GIRLYPANTS

    steering problem

    no its not usual for a servo to crap out on a new car but these things do happen, yes it does seem that you need a new stronger more torque servo
  8. GIRLYPANTS

    steering problem

    the servos are easy to take off, take them both off and test them
  9. GIRLYPANTS

    steering problem

    does the break/accelerator servo work when you put it on the steering channel, if so then yea i would say the steering servo has gone
  10. GIRLYPANTS

    F 4.6 and roto start

    I have no need for this F 4.6 or roto starter, replaced with LRP This engine has a new one way bearing and new cooling head was running perfectly when i took it off my truck, ive stripped, cleaned and rubbed after run on the internals Roto start works fine It just going to be rattling around my...
  11. GIRLYPANTS

    hpi 79 ford

    you should be proud of yourself, you did a great job, very nice truck you got there, id very happy with it
  12. GIRLYPANTS

    so just took my savage out for first time

    forgot to add ............ keep us updated with your thoughts and progress :)
  13. GIRLYPANTS

    so just took my savage out for first time

    great stuff, i do hope you enjoyed yourself, well done for holding back a bit till the engines fully broken in, great pics too tho some of the truck in action would be better :)
  14. GIRLYPANTS

    Carbs

    take it back, tell them they gave you the f 4.6 and you need the k 4.6, simples
  15. GIRLYPANTS

    bottom plate for the savage x4.6

    yes any bottom plate is good, don't matter what brand or cost just make sure it fits your truck, theres a few on the bay of e...
  16. GIRLYPANTS

    Savage X wheels binding

    I'm a bit confused as to how a tvp can make running gear bind, even with a slight bow they will be forced to straighten up when screwed down tight
  17. GIRLYPANTS

    new clutch system

    or ...... buy a piece of carbon fibre, hand your plate and the blank to a engineering company and say, make that but them slot holes set them back 2mm i am able to make that plate with the new adjusted holes but i don't live your side of the pond
  18. GIRLYPANTS

    new clutch system

    so, I'm now thinking, is it wise to just buy a hpi alloy plate, they are cheap enough, that way if it goes tits up you wont have hurt your carbon fibre plate tbh thats what id do
  19. GIRLYPANTS

    new clutch system

    anyway, its just a thought, last resort
  20. GIRLYPANTS

    new clutch system

    measure twice and cut once, carbon fibre is easy to file, you could drill it to the right od, then file it so it joins the slot already in the plate
Back
Top