Search results

  1. Jer0219

    Lrp .30 with buku?

    well the lrp one, the idle set screw broke. Then the other day running with the 5.9 was just on the second tank doing some runs across the field and on the way back she started running wierd then died, as I walked up to the truck I saw the inlet side of the carb just hangin down to the side the...
  2. Jer0219

    Lrp .30 with buku?

    sounds intresting, been over a month and still no word on the carb, took out the truck with the 5.9 and now that carb is broken.
  3. Jer0219

    Help with big bore shock caps

    well this is what I found, the threads seamed to be keeping the bladder from seating on the bottom, I used the dremmel to take away some of the thread which was bured any way so I had an even line from the thread all the way around, then I sealed up the bleader holes with some med ca glue. let...
  4. Jer0219

    Help with big bore shock caps

    Ltrus.....how did you make out? I also bought these caps, bladders are good and they don't seal, leak out same as yours. Only thing I can think of is the threads on the aluminum caps, towards the end of the thread closest to the bladder seal. Gonna give the ol' plumbers tape a try.
  5. Jer0219

    Lrp .30 with buku?

    ya I don't think I really noticed much difference on my lrp 28 with the buku, even with drilling out the holes to the larger size that Dave recommended. But that mill has more power than my 5.9 so can't really complain. Once I get the new carb for the lrp I'm gonna re set the tune with the...
  6. Jer0219

    scrap

    Was out running the savage, tuning it up. There were a couple guys out playing soccer. When they were done one guy came up and was (edit) that I was there and basically threatened me saying if I'm there next week we'll see what happens, I said ya we'll see tough guy, he was like what, I went to...
  7. Jer0219

    Tire balancing

    well all tires are done took about 19 to 21 grams of weight each tire, time to test.
  8. Jer0219

    MGT8.0 Tyres on an XL?

    how about the new losi xxl tires they look nice
  9. Jer0219

    LRP z.28 spec 3...idle set screw

    So the parts are available, and the carb is on back order, non the less its available and on the way, sure beats buying a whole new motor because of a stupid screw.
  10. Jer0219

    Lrp .30 with buku?

    ya I checked that, it is considerably bigger, I even checked the needles on an old os engine and it's too big too. My hobby shop was able to track down a complete carb, should be here in 2 weeks roughly:)
  11. Jer0219

    LRP Failure

    I also have the spec 3 .28 and the idle set screw broke just before the threads. Any leads on a carb?
  12. Jer0219

    LRP z.28 spec 3...idle set screw

    The place I bought the engine says the parts are no longer available, I think he just wants to sell me another motor. The parts say available on the ae website, so I don't know.
  13. Jer0219

    Tire balancing

    Just gonna have to get some sticky weights and balance them out.
  14. Jer0219

    Tire balancing

    Mine are big joes. I recently changed the foams, they seem a little better. But you can just feel it with one finger on the inside and one out, tire feels a little thinner on one end than the other. When they inject the mould with the rubber there is no guarantee that it is even. besides they...
  15. Jer0219

    Lrp .30 with buku?

    I'm not running the 5.9 with the buku I wanted to know if anyone has tried the lrp 30 with one. My 5.9 is a turd and is why I have an lrp 28 but the idle set screw is broken. The place I bought the engine says the parts are no longer available which is why I was inquiring about the lrp 30...
  16. Jer0219

    Share your crash damage pics!

    I had just installed the ofna linkage and didn't install the spring with it just used the stock return spring, and it popped off, I have since changed to the ofna spring and got rid of the stock on, all good now.
  17. Jer0219

    Tire balancing

    Ya but will modeling clay be heavy enough, like I said before I put a 7g weight on and it was no where near enough.
  18. Jer0219

    Lrp .30 with buku?

    yeah eh, I just ran the stock 5.9 and was quickly reminded of why I bought the 4.6. I was running with my big joes but they shake like mad so until I fix my old mill or buy a new one and try to figure out how to get these wheels somewhat balanced I'm not running the truck.
  19. Jer0219

    Lrp .30 with buku?

    Any one tried this set up, kinda curious since the idle set screw broke on my .28. Would love a vid if possible.
  20. Jer0219

    Tire balancing

    I don't have a balancer but just use my axle with the dog bone removed.
Back
Top