Search results

  1. chimeraxp

    Dual Stainless Brakes

    I checked one of my trucks , it uses SS disks and depending on gearing it can hit the bell
  2. chimeraxp

    Dual Stainless Brakes

    Only time I had this issue is when my motor twisted , check the mount . and for the record , I went to the red fiber and I won't step back down. I was replacing pads every few tanks... tried different combinations of pads with no luck , it was more maintenance then anything. as soon as the...
  3. chimeraxp

    Hot Bodies Shaft

    was doing some reading tonight . I'm still hoping someone can share their insite with it . stock savage shaft is 3x86mm Big bore shafts are 3.5x90mm what might these be , What would be a good replacement shaft ? I truly don't want to buy a shaft that does't fit , either too lose or too tight...
  4. chimeraxp

    ofna 250cc tank posts

    yup those look to be the same ones I installed
  5. chimeraxp

    WTB Roto Start 2

    I have one just sitting here , gear is stripped on in side , seen 1 or 2 starts looks almost new once dusted lol . let me know if your interested.(I'm in canada)
  6. chimeraxp

    Hot Bodies Shaft

    I have a a set of Hot Bodies Shocks , and yesterday I Blew three of them , Two of which the rod ends came off and the third I bent a shaft , all of the rear of the truck . I can't seem to locate replacement shafts so i was thinking of putting the BB shafts of them , I think they are shorter...
  7. chimeraxp

    STS HSN O-Ring

    I have an STS D.30M with a HSN O-ring that decided that it win't want to be an Oring any more. I know I can get a replacement ring set off the bay , But for something like 10 or 12 bucks after shipping . Does anyone with and STS or that Had one ,Know what size it is , as I have to put a...
  8. chimeraxp

    canada

    calgary , working on a few trucks cars at the moment , not sure when I will get out this year.Work always seems to get in the way of fun ;)
  9. chimeraxp

    WTB LF Parts

    Hey all , before I hit the bay thought I would post here , maybe someone has some parts kicking around. so I'm looking for a s.25 (21BB)connecting rod for a rebuild that I have going on . and last is a rotary carb , that will fit a os.18. let me know if you have anything
  10. chimeraxp

    os.30 Breakin Rich

    thats what I thought , it can't really heat up if its getting lots of fuel , its been too wet here to do anything .will have to wait till next week
  11. chimeraxp

    os.30 Breakin Rich

    factory plug , OS8 I think . 20% nitro , weather wasn't overly hot , 18C overcast . I haven't had time yet today to touch my truck maybe later.
  12. chimeraxp

    os.30 Breakin Rich

    oh dam , there was tons of smoke, and a dam puddle under the truck , i'm going to check the carb bolt and ,make sure it's tight , it's not acting weird other wise , I didn't see in the manual what the stock setting was for the mid needle. was going to double check it , I normally don't mess...
  13. chimeraxp

    os.30 Breakin Rich

    thanks but I have read it a few times now , knowing that the motor will be rich from factory and will consume tons of fuel is well normal , but in the last three motors I broke it I never had to do two complete turns in just to keep the truck running. mind you idle is perfect as soon as I...
  14. chimeraxp

    os.30 Breakin Rich

    I know that motors are suppose to be rich during break in , But I'm not sure whats the deal with this one , I had to lean it slightly just to get it to fire. after Running , doing circle around the basket ball court , this thing is just ****ing nitro out , temps are very very low , not...
  15. chimeraxp

    Chimeras FLM Midtank

    quick update before bed here I ran the linkage for the brake and throttle tonight. looks good seems very quick and smooth , more so now then before , no pictures tonight , I'll try and get some this week for you guys . just minor things left to do now , I need to go back and double check...
  16. chimeraxp

    charge rates peak rate

    Hey quick question for ya's i'm just going through my battery's and wanted to make a label for them . how does one figure out the charge rate for the battery's ? and the peak rate I have a tower hobbies digital peak , it was with in my price range , my pa has one like it to made by...
  17. chimeraxp

    Dragon Slayer

    sweet looking lid !
  18. chimeraxp

    Chimeras FLM Midtank

    bit up an update , I had a chance to work on the truck tonight , so I'll do my update now , before I head to bed , sleep for 5 hours and go stain a deck . I"ll start with the steering arm I fabed up tonight I used two endlinks and a rustler tierod , that I had spare of . I cut down the...
  19. chimeraxp

    somone help me make a partlist for midtank build?

    just wondering does the PRC come with the braces and post ? I assumed it did as the picture does show it and it lists as d includes all necessary hardware for installation. I haven't use it so I don't know , if it does then he might be able to shave a few bucks off the his price there.
  20. chimeraxp

    Chimeras FLM Midtank

    I got my plate another tank and posts from robert last week ,I haven't had time yet to play with it anymore but I had test fitted the IRC plate to location it will be installed , everything lines up , with minor adjustments to the rear of the plate I can mount the rear lower brace , the front...
Back
Top