Looking for 2 more

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.

TX2Bone

Member
Messages
5
I'm looking to buy 2 more lower suspension arms to match these 2. Can anyone tell me what brand they are or where I can buy 2 more 2 match? Or dose anyone have 2 that match they are willing to sell?

Thanks for any help.KIMG0662.JPG
 
alloy arms are not the best idea, reason is they transfer shock to other parts and they will bend also. stick with plastic your parts will thank you....
 
I can’t say for sure what they are, I’ve never seen them before. If you end up not wanting to wait to find a match and wanna part with them let me know. I collect odd parts. Many aftermarket manufacturers try and get in the market and didn’t make it so all kinds of random parts are out there. A lot of one offs too that people made them self, since those are anodized I don’t think they were a diy.
 
They are milled like golden horizon used to do. They didn't have many sharp edges on their stuff, it all had a nice radius if it wasn't an area where fitment would be impacted. I used to run some of their stuff many years ago when I had a t-maxx.
 
I can’t say for sure what they are, I’ve never seen them before. If you end up not wanting to wait to find a match and wanna part with them let me know. I collect odd parts. Many aftermarket manufacturers try and get in the market and didn’t make it so all kinds of random parts are out there. A lot of one offs too that people made them self, since those are anodized I don’t think they were a diy.
Thanks, I like them. I bought them from a hobby shop but they only had two and I'm looking to buy twi more to match.
 
I seen a pair on eBay that looked very much like the two you have and they were HPI racing parts.
Only saw some HPI branded ones on the uk site, but they don't look the same.
86256_01.jpg


https://www.hpiracing.co.uk/piw.php?partNo=86256

Found what appears to be the same ones on another forum in a post from 2009:
https://www.rcgroups.com/forums/showthread.php?1062469-HPI-Racing-Savage-XL-5-9-with-Aluminum-A-Arms-(RTR)#post12421052

Doesn't list the brand though.

I was thinking GH Hobby (Golden Horizon) because of the rounded edges, but I checked on www.wayback.com and found old images from 2008, they aren't the same... :(
2018-0712-WayBack-GoldenHorizonGH-SavageArms.jpg
 
Last edited:
F08873DD-8D8C-46B1-A2F5-C6EAE65BA4F8.jpeg
Only saw some HPI branded ones on the uk site, but they don't look the same.
86256_01.jpg


https://www.hpiracing.co.uk/piw.php?partNo=86256

Found what appears to be the same ones on another forum in a post from 2009:
https://www.rcgroups.com/forums/showthread.php?1062469-HPI-Racing-Savage-XL-5-9-with-Aluminum-A-Arms-(RTR)#post12421052

Doesn't list the brand though.

I was thinking GH Hobby (Golden Horizon) because of the rounded edges, but I checked on www.wayback.com and found old images from 2008, they aren't the same... :(
2018-0712-WayBack-GoldenHorizonGH-SavageArms.jpg
Sorry about that I thought they were the ones. Unless they are the golden horizons like before mentioned in at a loss. I have a set of hcr that look similar as well but not a exact match.
 
I don't know why I thought they weren't GH... looking at the photo today, they do look the same. I must have been blind yesterday.

Side by side:
2018-0713-GoldenHorizonSavageArms.jpg
 
I would not use these as the shocks can only be attached to the suspension arms one way at the bottom end. Look at Fast Lane Machine suspension arms. They allow for a bolt to (1) enter the suspension arm,(2) go through the shock and (3) get attached to the suspension arm. The same design is implemented on the stock arms. Yours on the other hand only require that the bolt (1) go through the shock and (2) attach to the suspension arm. Here is a picture of the FLM suspension arm.
 

Attachments

  • image.jpg
    image.jpg
    216.4 KB · Views: 6

Latest posts

Members online

Back
Top