Problem with my Carb

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
Rmadrid7

Rmadrid7

Well-Known Member
Messages
158
Location
Houston Tx
Hi everyone!!
I have a problem with my carb throttle.See pics. Is there a way to change where your hook the linkage? I try to lose it, but i am afraid to break it. Some advice is welcome.
Thank you
IMG_3894.JPGIMG_3895.JPG IMG_3896.JPG
 
It will be easiest to remove the engine to access the screw securing the arm to the slide.... make a mental note where you want it, loosen it up move it into place, I would move it so it points toward the spur a bit more and try to make it level and straight as possible and make sure to locktite that screw again. I have seen many of them vibrate loose and some actually lose the entire arm also.....
 
Jam Racing 1 said:
It will be easiest to remove the engine to access the screw securing the arm to the slide.... make a mental note where you want it, loosen it up move it into place, I would move it so it points toward the spur a bit more and try to make it level and straight as possible and make sure to locktite that screw again. I have seen many of them vibrate loose and some actually lose the entire arm also.....
Click to expand...
Jam Racing 1 said:
It will be easiest to remove the engine to access the screw securing the arm to the slide.... make a mental note where you want it, loosen it up move it into place, I would move it so it points toward the spur a bit more and try to make it level and straight as possible and make sure to locktite that screw again. I have seen many of them vibrate loose and some actually lose the entire arm also.....
Click to expand...
thanks Jam for the help
 
You must log in or register to reply here.

Latest posts

Members online

Total: 247 (members: 3, guests: 244)
Back
Top