Venom hump pack

So I bought a 1600 hump pack for my savage x and tried to install it and found that i need to buy a special connector. Can someone help me with the one i need thanks. Venom hump pack # 1504

got a pic you can post so I can see the connector ??
I recently won one with the same part #1504 and it plugs right into my stock wiring system

no but it says it has a universal receiver connector

NightFlier X4.6 said:

no but it says it has a universal receiver connector

Click to expand...

Mine is setup with a flat 3 connector with 2 of the slots filled with black and red wires, it plugs right into my switch harness like a dream. is your switch harness a flat 3 connector also or is it something different..... some are just a small 2 pin red connector on the switch so you may have to make or get an adaptor cable,

this one is a common JST connector used by some switches...


The other one used is like this a flat 3 setup minus the white wire in the pic only using red and black commonly used by Futaba radio switch setups


I am thinking you will need this connector adaptor

This would be a jst male to futaba female connector

jam is correct. I had to buy one of those when I bought my 1200mah pack. they're only 2-3$

thanks guys