FS: acme raptor truggy

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
Status
Not open for further replies.

rcnut14

I give bad advice
Messages
1,297
Location
lancaster county, pa



here I have an acme raptor truggy. I got it for Christmas, and I simply want something that I can upgrade for racing. the truck came as as kit. it is 4wd. it has a rebranded hobbywing brushless system(2080kv motor and 35a esc). I switched out the servo with an hpi sw20 waterproof servo.( note: the integy servo horn is not included). it has a total of 2 battery packs on it. so it is very lightly used. all it needs is a spur gear, which I will include. the esc fan never worked, but I havnet had any heat issues( u can get them for 10$ on tower hobbies). it comes with the original balance charger, original battery( 1800mah 25c 3s LiPo) and 2 poweredge 2600mah 45c 3s lipos. all have been broken in properly, always have been balance charged, and have less than 1 run on them. it also comes with some hardware, shock oil, and locktite. all u need is a radio.

I'm asking 300$ and we can work out shipping(I'm not sure what it will be). the 2600mah lipos are worth 50 a piece. pm me with any questions. ill be happy to ansewer.
note: the truck does have an upper deck, but I removed it for the picture. it will come with the truck.
note #2: because it was a kit, it does not fit into the box full assembled. if u want the box, I can fit it in by taking off the axles( only 8 screws) or I can ship it assembled in a larger box( u won't get the original box then).
 
Status
Not open for further replies.

Latest posts

Members online

Back
Top