blown68ssrs
Active Member
- Messages
- 110
How far are the pins suppose to protrude outwards? This is as far as mine will go in.
-
Ask questions. Share your HPI Savage knowledge. Register TODAY!
How to get the pins to go in further
- Thread starter blown68ssrs
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
links, including eBay, Amazon, and others.
- Messages
- 4,790
Maybe just a touch further... try tapping them lightly with a screwdriver handle....
blown68ssrs
Active Member
- Messages
- 110
- Thread starter
- #3
So I found out why the pins won't go in any further. I took the back half off and removed the upper control arm. The receiving hole is out of alignment by a hair. Tried tapping it. Won't go. Thinking to round the end of the pin. Any other suggestions? Thanks
sharkattack99
Well-Known Member
- Messages
- 926
- Location
- Moses Lake Wa
Have you checked the diff housing for damage in that area? If it's out of alignment there must be some damage some where and if so I recommend replacing the whole housing.
blown68ssrs
Active Member
- Messages
- 110
- Thread starter
- #5
Took the back half off. Punch and a rubber mallet. Problem solved.
Thanks for the input
Thanks for the input
