88gtanotchback
SAVAHOLIC
- Messages
- 1,280
Well guys ive been in the hobby for a long time, but have just tired of the hobby. its overwhelming how much stuff/junk i have accumulated. don't know why i got as much as i do, but when its all pulled from the boxes its disgusting. haha. anyways I'm gonna try to make this painless as possible. sell in bigger lots, but if you need pieces, that can be arranged as well. i just like to limit trips to post office. so if you buy something, the box will likely be topped off with parts, unless you don't want it to be. buyer will pay shipping, and I'm in Canada, so it may be a bit. everything will be as is since i haven't ran anything in so long. the prices will reflect that. i would recommend a full tear down/rebuild when trucks are received to be sure everything is ready to rock, but that would be up to you obviously.
ill start with my pride and joy, as seen here.
http://www.savage-central.com/modul...opic&t=96070&postdays=0&postorder=asc&start=0
its dirty now and hasn't been ran in a year or so. all the high end parts are still there tho.
$550
1
FLM forward tranny conversion with the previous owner adding a roll cage.
$100
Savage flux. basically stock, with a 7995 servo if i remember correctly.
$450
$600 i add 2 2s and 2 3s lipos and a hyperion duo charger and power supply.
Savage 25 roller. i will add anything savage 25 parts related, which will be a ton of stuff.
$80
FLM roller. 9100t and s9451 servos ( i think, i can double check) lots of nice parts again. can add a LRP .30
$250 roller
$375 with motor
Carbon fiber plates, picco motor, aluminum big bores, but missing a few things. could throw in servos, and whats missing to complete.
$250
$300 with good servos.
fuel tanks, parts, pipes, shocks, you need something? ask.
add a set of tires for $20-$40 ( not the baja ones )
no remotes or reciever included. I do have a couple i can throw in if you need. I do have a DXR3 ill sell with one rx for $130
Hpi suspension conversion $85
ill start with my pride and joy, as seen here.
http://www.savage-central.com/modul...opic&t=96070&postdays=0&postorder=asc&start=0
its dirty now and hasn't been ran in a year or so. all the high end parts are still there tho.
$550
1
FLM forward tranny conversion with the previous owner adding a roll cage.
$100
Savage flux. basically stock, with a 7995 servo if i remember correctly.
$450
$600 i add 2 2s and 2 3s lipos and a hyperion duo charger and power supply.
Savage 25 roller. i will add anything savage 25 parts related, which will be a ton of stuff.
$80
FLM roller. 9100t and s9451 servos ( i think, i can double check) lots of nice parts again. can add a LRP .30
$250 roller
$375 with motor
Carbon fiber plates, picco motor, aluminum big bores, but missing a few things. could throw in servos, and whats missing to complete.
$250
$300 with good servos.
fuel tanks, parts, pipes, shocks, you need something? ask.
add a set of tires for $20-$40 ( not the baja ones )
no remotes or reciever included. I do have a couple i can throw in if you need. I do have a DXR3 ill sell with one rx for $130
Hpi suspension conversion $85