savage sale time

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.

88gtanotchback

SAVAHOLIC
Messages
1,280
Well guys ive been in the hobby for a long time, but have just tired of the hobby. its overwhelming how much stuff/junk i have accumulated. don't know why i got as much as i do, but when its all pulled from the boxes its disgusting. haha. anyways I'm gonna try to make this painless as possible. sell in bigger lots, but if you need pieces, that can be arranged as well. i just like to limit trips to post office. so if you buy something, the box will likely be topped off with parts, unless you don't want it to be. buyer will pay shipping, and I'm in Canada, so it may be a bit. everything will be as is since i haven't ran anything in so long. the prices will reflect that. i would recommend a full tear down/rebuild when trucks are received to be sure everything is ready to rock, but that would be up to you obviously.

ill start with my pride and joy, as seen here.

http://www.savage-central.com/modul...opic&t=96070&postdays=0&postorder=asc&start=0

its dirty now and hasn't been ran in a year or so. all the high end parts are still there tho.
$550
o9r7h0.jpg


1
FLM forward tranny conversion with the previous owner adding a roll cage.
15802504_large.jpg

$100

Savage flux. basically stock, with a 7995 servo if i remember correctly.
21ltwqo.jpg

$450
$600 i add 2 2s and 2 3s lipos and a hyperion duo charger and power supply.

Savage 25 roller. i will add anything savage 25 parts related, which will be a ton of stuff.
30lifqf.jpg

$80

FLM roller. 9100t and s9451 servos ( i think, i can double check) lots of nice parts again. can add a LRP .30
2l9pe35.jpg

$250 roller
$375 with motor


Carbon fiber plates, picco motor, aluminum big bores, but missing a few things. could throw in servos, and whats missing to complete.
2vn12jt.jpg

$250
$300 with good servos.

fuel tanks, parts, pipes, shocks, you need something? ask.
2aad3ch.jpg

r8atd5_th.jpg

11bs229.jpg


add a set of tires for $20-$40 ( not the baja ones )
nnl8c4.jpg


no remotes or reciever included. I do have a couple i can throw in if you need. I do have a DXR3 ill sell with one rx for $130
Hpi suspension conversion $85
 
Carbon fiber plates, picco motor, aluminum big bores, but missing a few things. could throw in servos, and whats missing to complete.
2vn12jt.jpg

$250
$300 with good servos
^how much without the motor, if possible I don't need the motor will take it though? Is it still available? Had to do it this way your inbox is full lol.
 
Carbon fiber plates, picco motor, aluminum big bores, but missing a few things. could throw in servos, and whats missing to complete.
2vn12jt.jpg

$250
$300 with good servos
^how much without the motor, if possible I don't need the motor will take it though? Is it still available? Had to do it this way your inbox is full lol.

Eh what the heck I'll take the whole thing not the servos though just what is pictured. like I said if it's still available and the shipping isn't more than the truck lol. Thanks
 
dang, I'm actually getting the itch to finish my nitro build !!
 
No savage 25 parts left. Most is sold but still have lots of parts. I'll update from a home computer later, instead of phone
 
Hi Scott how much for for the CEN radio box shipped to Boston, ma? I'm working on an IRC standard length truck with mid tank.
 
Hi Scott how much for for the CEN radio box shipped to Boston, ma? I'm working on an IRC standard length truck with mid tank.
Hey Fred, shipping is the pricey part. Prolly $10 shipped. You'd be better off on eBay likely. Unless you need a few things then I can make it worth your while.
 
2aad3ch.jpg

^^^^that tank with the lines hanging off of it....what is it and is it still avialible?

I also need a savage x radio box( it doesn't have to have the lid).
 
I do have a rtr savage I built. But I built it with upgrades and the radio. Is a dx3r so it may be a little bit more the. Your looking to spend. Pm if your interested. I can send you details. I replied to other message as well
 
I'm interested in the FLM Roller, is it still available?
May be interested in 2 or 3 sets of wheels/tires also if we can make a decent enough deal.
 
I know this is old, but do you still have the phaltine tires/wheels? If they are 17mm and you want to sell, PM me a price shipped to IL.
 

Latest posts

Members online

Back
Top