Recent content by smileyman63

  1. smileyman63

    WTB Picco p3 .28 button head

    I have an older Picco P3 .28 with a stripped out button head. I haven't been able to find a replacement. Does anyone have an old button head laying around they would be willing to sell? Standard head not the turbo head. Thanks
  2. smileyman63

    Fly Sky FS-GT3B Problem

    Same thing happened to mine :( I tried glue and it wouldn't hold. Flysky said they would send me one if I paid shipping but it would of been a hassle. I fixed mine like I was tying a fly for fishing. I used a cut hook on both sides then wrapped it all the way up and down with string then put...
  3. smileyman63

    LRP one way bearing

    Hey guys, Does anyone know if the one way bearing is the same on the LRP .28 and the .30? Mine is starting to slip alittle on the .30 and I am needing to pick up a new one. I was looking a little on Ebay and it seems like they are a lot cheaper for the .28. Thanks
  4. smileyman63

    Slow until powerban

    Hey guys, I was out running my savy with the picco in it for the first time in a few months and I'm having some tuning issues. I am usually pretty good at tuning engines but I can't figure this out. It starts off like it has the worst tune ever. Slow slow slow, then after it picks up rpms it...
  5. smileyman63

    HSN o-ring for LRP Z.28R Spec 3?

    should any o-ring that is snug work? I'm having the same problem with my lrp 30. Running it with the wheels off the ground I hit the throttle then the brakes and it leans out about a 1/8 a turn each time.
  6. smileyman63

    RB MT11 or LRP .30 ?

    I have the .30 in my XL and I have to say it rips. The torque is crazy with the mill. I haven't down much for high speed but I can say it's an awesome bashing motor.
  7. smileyman63

    diff shim sizes help

    Hey everyone. I have been having problems with my diffs in my XL. I read a bunch of post on shimming and I bought a the Kyosho shim pack 8x10mm. I thought that was the correct size for the bearings because I'm getting a lot of side to side in the bulk head and toasting my pinion gears. Well as...
  8. smileyman63

    New HPI Savage XL

    I'm not expecting much for the Maxx but its some money back in the pocket for spare parts. I'll get some pics and hopefully some videos up by this weekend. Already pulled some double back flips with the XL. I still have to go through it, I don't have a clue what diff and shock oil are in it.
  9. smileyman63

    New HPI Savage XL

    Hey guys- Just wanted to share my excitement with everyone. I have been looking for a new savy to upgrade my 21 since my picco keeps breaking all the weak parts. So I got on craigslist and found a XL with a new LRP .30, 086 pipe, and aluminum big bores for 300 bucks. I emailed the guy met up...
  10. smileyman63

    Did I fry my engine?

    You will fill no compression without the glow plug. Instead of the air compressing it just goes out the hole. That is why it is easier to turn the engine without the glow plug installed. I bet your engine is good to go.
  11. smileyman63

    diff issues

    anyone?
  12. smileyman63

    diff issues

    Hey guys I'm having a bunch of issues with my diffs. I keep chipping my bevel gears and have gone through a few diff cups (LHS only had plastic ones). I have been reading post about shimming which I am going to do as soon as I get parts. But my question is I see some shim the inside and some...
  13. smileyman63

    air filter

    Hey guys I finally got around to building a ramp for my savy. It seems like every 10 or so jumps my air filter pops off. I have zip ties on it as tight as I can get them. Anyone have any good tips or tricks to keeping that thing on? Thanks guys
  14. smileyman63

    Need some help

    I had the same thing happen when my mil got a little older. It would run great and seem to have plenty of power but after it was hot it lost most all of its compression. I could only get about two minutes of running before I had to let it cool all the way down and start it up again.
  15. smileyman63

    WTB 086 pipe and header

    anyone?
See more
Back
Top