Recent content by scameron

  1. S

    Savage 21 to XL Conversion Project

    if you think about it, you built an XL from scratch. i had the same thoughts with my 21, but in reality i didn't use one piece from the 21.
  2. S

    four bevel diff gears

    what i do is go to HPI's web site and download the manuals for the different savages. i look at the exploded views and compare parts. the new manual for the XL shows 102692 now for the ring and pinion. 87193 is the part number for the bevel gears in the XL and 86032 is for the X. according...
  3. S

    Bulletproof diffs .....

    how old is your XL? HPI switched to BP ring & pinon gears in the XL at some point.
  4. S

    Question on linkage

    i have all my parts for a 250cc mid tank except the linkage. i have a list put together OFNA 10721 OFNA 10701 OFNA 10728 this seems tough to find now OFNA 10731 do i need this. i've looked through the entire thread here on mid tanks and seems a few individuals set there linkage up...
  5. S

    school me in diff gear sets

    i purchased what i think is an older savage 25. i got to looking at the diff shafts and they look pretty worn. so i was going to replace them, but while i was in there thought i'd upgrade a few things. been looking on ebay for a while at parts. not completely sure what direction to go in. it...
  6. S

    Chimeras FLM Midtank

    so how does the Innovative fuel tank plate fit with the FLM TVPs?
  7. S

    I had a thought this past week.

    i maybe putting the brakes on this till i find out if i can get a diamond coated cutter for the CNC machine here at work. i used a 22.5 degree V bit to cut my prototype out. what's nice about this bit is that the actually cutting blade can be changed out. replaceable blades are cheaper then...
  8. S

    I had a thought this past week.

    i need to modify the emblem so that the engraving cuts all the way through.
  9. S

    I had a thought this past week.

    savage is a good name for a Decepticon i felt. i draw up some XL TVPs in autocad and machined them out using one of the CNC machines at work. the fit is pretty good for the first go around. i don't like how the emblem came out. needs to be more open. also, the cut outs might be too much for...
  10. S

    Driveshafts too short?

    in the savage manual it calls for 6811. the 75080 are bigger. any particular reason for using 75080
  11. S

    Driveshafts too short?

    my drive shaft on the left front wheel started popping out of the axle cup under wot while turning the wheels. they appear to be a little short, but that can't be. seems to be about 3/8" of play in them. i checked another savage i have and this isn't the case. it seems to have minimal play...
  12. S

    update with video, what is my truck doing

    just watched this video again. my truck is doing exactly the same as the truck in the video when the LSN is lean. http://www.youtube.com/watch?v=BJFsJAxNoRg
  13. S

    update with video, what is my truck doing

    thanks a ton Mike. i've read that manual forward and backwards. yeah doesn't make mention of the gap. once i get the axle fixed i'll be running it again. there is a local shop that should have a new one. not sure what has happened to it. maybe the drive shaft is bent or something. i'll...
  14. S

    update with video, what is my truck doing

    set the opening at little more then 1/32. i popped the filter off and set the gap on the slide. pushed the slide completely closed then turned the idle screw till i had what i felt was 1mm. the motor doesn't die when i hit the brakes. actually my brakes don't want to kick in. i need to...
  15. S

    update with video, what is my truck doing

    thanks nitro. i thought about doing so with the lighter.
See more
Back
Top