Search results

  1. texasavage

    Good street tire combo?

    I have the Phaltline's but they tore where the sidewall meets the tread and now I'm looking for something new. The tear probly came from too much toe on the rear, which now I have the Integy rear hubs so it might not be an issue now I'm looking at the Proline Road Rage but not sure if I...
  2. texasavage

    FLM Drag Link - issue with full throw

    I installed a drag link today, and looks like it will not allow full throw once I get my RSC later on. I was wondering if anyone had any tips on this? I'm not sure why FLM made these with such a big U shape to them, if they went alittle straighter I could just shave the bar that connects to...
  3. texasavage

    X 250cc budget midtank

    Been working on this for the last couple of weeks and it almost done. Not sure if anyone remembers my 25 budget midtank, but I used some of the same ideas except the tank. That one was only a 125cc tank and run times were horrible. The only new part on this project was a Ofna 250cc tank...
  4. texasavage

    Happy Birthday Drummer and Visonary!

    :party: Drummer and Visonary! I hope you guys have a great birthday! Be safe fellas :beer:
  5. texasavage

    What servo horns are you using for the XP/Ace?

    I'm getting ready to install my XP DS1015-DS1313 servo's and I'm not sure what horns to order. Did a search on google and found that they use smaller spline than the Futaba although both are 25 tooth count. Some have fixed this by using a thin plastic bag to take up the slack, but I'd rather...
  6. texasavage

    Husky Tool Bag

    --Husky 14" The Total tool bag with tool wall-- I just picked up this new bag over the weekend from Home Depot. I was looking for something that will take care of my radio and still hold some tools. This one seemed to be just what I was looking for, although it was alittle pricey at $89 lucky...
  7. texasavage

    My newish X

    Well a buddy of mine gave me his X parts truck so I decided to retire my 25. I had to pull alot off the 25 to get this bad boy rolling. For now i stuck with the stock tank setup, but I think I'd like to midtank it like the 25 later. I don't like getting to the pull start with the tank in the...
  8. texasavage

    Happy Birthday Fx!!!

    Happy 18th Birthday Paul! :party:
  9. texasavage

    Happy Veterans Day!!

    I wanted to thank and :salute: all the service members for dedicating your lives for our everyday freedoms. Thank You! :patriotism: I know it's late but this is the only time I get after the turds go to bed :) Sorry if I missed another thread for this.
  10. texasavage

    Help me decide on fuel

    Well I'm hoping to finally break in my Lrp this weekend, but the fuel I have on hand was opened in July when I first tried to break her in (one way bearing issues). I never even made it through a tank of break in. I'm not sure if this fuel will still be good, its Rocket science 20% not sure what...
  11. texasavage

    Smoke free for over a month!

    Wow I never thought I could do it, but I stopped smoking on Sep 25th. It hasn't been a walk in the park, but not as hard as I have made it out to be in the past either. I've tried a few times before and failed mainly because I just wasn't ready. I didn't use a single patch, shot, or pill, just...
  12. texasavage

    .25 Bulk to X Bulk parts needed?

    Well getting to the .25's diffs is are real pain Can I just swap out the Bulk or do I need to change alot of other stuff as well? Which one should I order? 85235 or 85045
  13. texasavage

    LRP .28 one way bearing failure

    Well I tried to break in the lrp today after work. I had to refire a few times. Next thing you know I pull on the pullstart and bam it doesn't retract. Said to myself no way, anyways I pulled off the pullstart and it retracts. Come to find out the darn one way bearing is locked. It turns the...
  14. texasavage

    Ofna 086 Direction of stinger help

    I received my LRP and 086 today, but i'm not really crazy about the stinger pointing out like this. I wish it had some more one piece spring hole options. I'll let the pic do the talking :) Here you can see the header spring attachment holes are in the circles(I'm used to them being...
  15. texasavage

    new mill and pipe help

    I went to the hobbystore in Ausin today looking for a new mill. here is what I found. osmg2077 for $199 and came with a pull start osmg2076 for $175 no pull start but is designed for the savage -os web page- I want a pullstart and these have the same specs so the "2077" model shouldn't...
  16. texasavage

    surefire .32r - dumped rear bearing

    well after about a tank and a half of fun today i dumped the rear bearing of the surefire :stressed: i'm not sure but it looks like i lost alot of balls, but i only dropped 2 out when the crank came out. i didn't see any noticable gouges in the block or anything. this sucks expecially since...
  17. texasavage

    budget midtank

    this project has been done for a while now. i really wanted an official bought midtank but my "accountant" has not clear me any cash so after the mason rd bash in houston with all the cleaning i had to do i figured that was the best time to try it while it was all apart. all parts are from...
  18. texasavage

    surefire .32r broken one way bracket - pin

    hey guys, i went to run the truck today and everything was going good untill i stopped for some fuel. went to crank her back up and noticed that the pull start wasn't pulling anything. so i figured ok fine it might need alittle cleaning. when i got home this is what i found one way bearing...
  19. texasavage

    new bodies

    i've been away for a little while so i thought i'd show some more recent pics of the savage. hope you like :) mine is the savage 25 -- 80 chevy PRO324800 lst size buddies savage 25 -- hpi's dodge ram buddies savage x -- proline 72 chevy savage size they don't look like this anymore of...
  20. texasavage

    New Mill--Surefire .32 or LRP .28?

    I'm looking into getting a new mill for the Savage. I was leaning more to the LRP, but it seems like some of you guys are having some problems with half tank lean and finding parts. I also read Megabyteme's review on the Surefire and it seems like a good mill. Pluses on the surefire are that...
Back
Top