TT ext lcg Savage Build # 1

[Maxx-Power03]

Here is a pic of my SS before i took it apart.

http://i27.photobucket.com/albums/c175/maxx-power03/Savage%20TT%20Build/100_4804.jpg

First i started with my diffs. 30,000 ofna diff fluid. Aluminum diff cups. 4 gears. And shimmed.

http://i27.photobucket.com/albums/c175/maxx-power03/Savage%20TT%20Build/100_4928.jpg

Then aluminum nova shock towers.

http://i27.photobucket.com/albums/c175/maxx-power03/Savage%20TT%20Build/100_4930.jpg

Ohh ya. all new bearings for the truck. Boca bearings sealed green rubber.

http://i27.photobucket.com/albums/c175/maxx-power03/Savage%20TT%20Build/100_4935.jpg

Then i put on savage X lower arms and kept the SS adjustable uper arms. Also i put on rear turn buckle eleminators.

http://i27.photobucket.com/albums/c175/maxx-power03/Savage%20TT%20Build/100_4936.jpg

Then i put on Twisted Toys 1" ext lcg tvp's and skid plate and one piece engine mount.

http://i27.photobucket.com/albums/c175/maxx-power03/Savage%20TT%20Build/100_4941.jpg

Here is a better pic of the TT one piece engine mount.

http://i27.photobucket.com/albums/c175/maxx-power03/Savage%20TT%20Build/100_4942.jpg

Then i sealed the plastic skid plate to the aluminum skid plate support to keep out dirt from getting into the ring and pinion gear.

http://i27.photobucket.com/albums/c175/maxx-power03/Savage%20TT%20Build/100_4945.jpg

Here is a pic of the TT rear dog bone next to the factory bone.

http://i27.photobucket.com/albums/c175/maxx-power03/Savage%20TT%20Build/100_4948.jpg

Here is a pic of what i have got together so far today.

http://i27.photobucket.com/albums/c175/maxx-power03/Savage%20TT%20Build/100_4951.jpg

http://i27.photobucket.com/albums/c175/maxx-power03/Savage%20TT%20Build/100_4954.jpg

[Maxx-Power03]

Well i forgot to list and take pics of some of the things i did to it such as. Upgraded servo's, fail safe, FM radio and receiver, shocks have 35wt oil.

Well next its the engine. Its a Omega .26 "picco" X3

http://i27.photobucket.com/albums/c175/maxx-power03/Savage%20TT%20Build/100_4957.jpg

Here is a pic of it bolted in the truck.

http://i27.photobucket.com/albums/c175/maxx-power03/Savage%20TT%20Build/100_4960.jpg

Then i put a ritter pipe on it. I dont know much about these pipes but im going to find out. LOL

http://i27.photobucket.com/albums/c175/maxx-power03/Savage%20TT%20Build/100_4962.jpg

Then i put the shocks with 35wt oil in them on the shock towers with spacers.

http://i27.photobucket.com/albums/c175/maxx-power03/Savage%20TT%20Build/100_4965.jpg

And then bolt on some wheels and put on some zip ties and new fuel line. And im done!!! :twisted: No test drive today because its raining here in Florida....well its pouring really. :cry:

http://i27.photobucket.com/albums/c175/maxx-power03/Savage%20TT%20Build/100_4968.jpg

http://i27.photobucket.com/albums/c175/maxx-power03/Savage%20TT%20Build/100_4970.jpg

Then i put my aluminum wheels and tires that make it alot wider. Its a little over 18 inch's wide and 22 inch's long.

http://i27.photobucket.com/albums/c175/maxx-power03/Savage%20TT%20Build/100_4980.jpg

http://i27.photobucket.com/albums/c175/maxx-power03/Savage%20TT%20Build/100_4976.jpg

http://i27.photobucket.com/albums/c175/maxx-power03/Savage%20TT%20Build/100_4973.jpg

[Maxx-Power03]

Here is a few pics of the carbon fiber extendor i made for the X roll hoop and head protector to fit the 1" ext tvp. Man i love these trucks. I have a killer basher and this racer both TT trucks.

http://i27.photobucket.com/albums/c175/maxx-power03/Savage%20TT%20Build/100_5316.jpg

http://i27.photobucket.com/albums/c175/maxx-power03/Savage%20TT%20Build/100_5319.jpg

http://i27.photobucket.com/albums/c175/maxx-power03/Savage%20TT%20Build/100_5321.jpg

[HPI_Savage25]

NICE work man. That looks AWESOME. I have heard good things about the ritter pipe though i have not seen it in person.

[paintslayer]

Nice setup you've got there looks like it cost a mint also

[wullie]

that looks amazing!!

[windjammr]

hows the pipe working?
looks killer

[Maxx-Power03]

Thanks Guys!!!!

Let me just say the truck was worth every penny i put into it. This set up is working great. The pipe is awsome. It is a little heavy but it makes up for it in performance. It lets the motor reach its full power all through thr rpm. I also have my second savage... The X Basher. Here is a few pics of that bad boy also. I just need to get some lst shocks for it to complete it.

http://i27.photobucket.com/albums/c175/maxx-power03/Savage%20TT%20Build/100_5117.jpg

http://i27.photobucket.com/albums/c175/maxx-power03/Savage%20TT%20Build/100_5119.jpg

[Jeepguy]

And what bodies are you using on the extended chassis Sav? How do they fit? Did you have to modify the mounting posts? or just cut new holes? How about the X roll bar.. need to modify for that too? Looks very cool, and Im sure it runs great, I'd just love to see some pics with the body (s) on it.
Vinny

[sledman1234]

nice gear there bud keep the nitro burnin