PDA

View Full Version : Trinity Monster Horsepower


HPI_Savage25
07-10-2006, 06:53 AM
Ok I have been running Blue Thunder for 2 gallons now and heard from a lot of people that it sucks.............so,....... i went to my lhs and asked to get something diffrent and handed me my 3rd gallon but first gallon of trinity.. Is it a good fuel ohand it is 20 percent. Also how should i do the break in for it with the stock 25 motot? thanks in advance

HPI_Savage25
07-10-2006, 05:09 PM
anyone.. Chunky.. X you guys don't have an opinion.. man that is weird!

Xjeepguy
07-10-2006, 08:02 PM
I ran the stuff in my first savvy, and it did run well on it. The only reason I dont run it now is price. The sidewinder performed exactly the same for $6 less. But it is WAY better than what you were running.

HPI_Savage25
07-10-2006, 08:07 PM
well i am gonna run my last tank in it. do i need to do a sort of 'break in' ?

Xjeepguy
07-10-2006, 09:02 PM
If your engine is broke in already then no

HPI_Savage25
07-10-2006, 09:05 PM
yeah it is already with 2 gallons on.

Hoppedup Savage
07-10-2006, 09:16 PM
whats so horrible about blue thunder?

Xjeepguy
07-10-2006, 09:22 PM
It gums up and causes corrosion on your internal parts. I had 2 motors I got from my cousin that all the internal parts were stained blue and there was some serious corrosion on the conrod and crank. He didn't even let them sit long and they were stored in his room, so it was climate controlled. That stuff is bad news. Seen it too many times.

Hoppedup Savage
07-10-2006, 09:25 PM
i use after run oil and or wd40 after every run though i used 2 gallons in a cen engine (.16) i never had any problems, i even looked inside after it had sat for about 3 months and i tried starting it after i put it back together and it fired on the first time

beer
07-11-2006, 12:27 AM
Just a word of advice, don't use WD-40 on the inside of your engine as it will only displace the water (meaning corosion could still take place), while After Run will absorb the water in the engine
:cool:

Xjeepguy
07-11-2006, 01:05 AM
Just a word of advice, don't use WD-40 on the inside of your engine as it will only displace the water (meaning corosion could still take place), while After Run will absorb the water in the engine
:cool:

That is exactly right.

HPI_Savage25
07-11-2006, 06:37 AM
only thing I use wd-40 on is to clean my truck I dont put it in the motor..

Hoppedup Savage
07-11-2006, 10:37 AM
alright, i mostly just use after run oil

jdogg_js_here
07-11-2006, 08:33 PM
I run trinity horsepower fuel it runs good on it, only bad thing about it I see is the high price.