screws vibrating out ???

[ivan]

ok i am sure u can get a type off glue what u put on the screws so the screws do no vibrate out but what is it called ???

[SunkenMetal]

Thread lock, http://www.amainhobbies.com/product_info.php/products_id/4409

[Tom H.]

ok i am sure u can get a type off glue what u put on the screws so the screws do no vibrate out but what is it called ???

Here's what I'm using (available at any auto parts store):

http://www.permatex.com/products/Automotive/thread_compounds/b_threadlocker_gels/auto_Permatex_GEL_TWIST_High_Strength_Threadlocker _RED_Gel.htm

[YeahYeah]

Just to throw more out there, here is some from SMF - http://www.smfstore.com/product_info.php?cPath=112_162&products_id=337

I hope it works, as I have made the claim that if my diff screws back out I will eat the diff ... o.O

[Dreadnaught]

i use the samebrand that BMC linked, but the blue stuff. the blue isnt as strong, but it holds up well. just dont use the green stuff.....youll never get it back apart.

[whipnet]

One more? lol

I use the original.... Loctite.
http://www.henkelna.com/cps/rde/xchg/henkel_us/hs.xsl/1554_USE_HTML.htm?countryCode=us&BU=ut&parentredDotUID=0000000GHE&redDotUID=productfinder&param1=pageIndex%3D0%7Caction%3Dsearch%7Cmode%3Dad vanced%7Ckeyword%3D%7Cy%3D355%7Cx%3D0%7Capplicatio nRedDotUID%3D0000000276%7CsubsubapplicationRedDotU ID%3D%7CsubapplicationRedDotUID%3D00000002IP%7Cbra ndRedDotUID%3D0000000389%7C

242 Blue - Medium
272 Red - High strength

*

[nickmind]

One more? lol

I use the original.... Loctite.
http://www.henkelna.com/cps/rde/xchg/henkel_us/hs.xsl/1554_USE_HTML.htm?countryCode=us&BU=ut&parentredDotUID=0000000GHE&redDotUID=productfinder&param1=pageIndex%3D0%7Caction%3Dsearch%7Cmode%3Dad vanced%7Ckeyword%3D%7Cy%3D355%7Cx%3D0%7Capplicatio nRedDotUID%3D0000000276%7CsubsubapplicationRedDotU ID%3D%7CsubapplicationRedDotUID%3D00000002IP%7Cbra ndRedDotUID%3D0000000389%7C

242 Blue - Medium
272 Red - High strength

*


+1 Only use the Blue 242. If you use Red, like on engine screws you will increase your chances of striping them. Just go blue!

[Dreadnaught]

Just go blue!

took the words right out of my mouth. http://www.jblamura.com/images/michigan.jpg

[AoD]

I use Great Planes loctite. Comes in a red bottle, however it is blue. It seems to hold the best for me. However, it's not that hard to drop out screws after a good coating of the stuff. :)

[ivan]

thats it thread lock thx i will go and get me some off that blue stuff

[oregonmud]

One more? lol

I use the original.... Loctite.
http://www.henkelna.com/cps/rde/xchg/henkel_us/hs.xsl/1554_USE_HTML.htm?countryCode=us&BU=ut&parentredDotUID=0000000GHE&redDotUID=productfinder&param1=pageIndex%3D0%7Caction%3Dsearch%7Cmode%3Dad vanced%7Ckeyword%3D%7Cy%3D355%7Cx%3D0%7Capplicatio nRedDotUID%3D0000000276%7CsubsubapplicationRedDotU ID%3D%7CsubapplicationRedDotUID%3D00000002IP%7Cbra ndRedDotUID%3D0000000389%7C

242 Blue - Medium
272 Red - High strength

*

The blue works perfect.